NUMERICAL RESULTS QUALITY IN DEPENDENCE ON ABAQUS PLANE STRESS ELEMENTS TYPE IN BIG DISPLACEMENTS COMPRESSION TEST
Bartosz KAWECKI
b.kawecki@pollub.pl* Lublin University of Technology, Faculty of Civil Engineering and Architecture, Department of Structural Mechanics, Nadbystrzycka 40, 20-618 Lublin (Poland)
Jerzy PODGÓRSKI
Lublin University of Technology, Faculty of Civil Engineering and Architecture, Department of Structural Mechanics, Nadbystrzycka 40, 20-618 Lublin, (Poland)
Abstract
The paper presents a brief description of the Abaqus Simulia plane stress quadrilateral elements (CPS4R, CPS4I, CPS4, CPS8R, CPS8). Comparison of the results quality obtained using each of them was done. There was considered two dimensional big displacements compression test for a highly orthotropic material. Simulations were performed for the compression in two perpendicular directions.
Keywords:
Abaqus Finite Elements, Plane Stress, Orthotropic MaterialReferences
Abaqus/CAE V6.14 User's Manual.
Google Scholar
Armstrong, C. G. (1994). Modelling requirements for finite-element analysis. Computer-Aided Design, 26, 573–578. https://doi.org/10.1016/0010-4485(94)90088-4
DOI: https://doi.org/10.1016/0010-4485(94)90088-4
Google Scholar
Barlow, J. (1989). More on optimal stress points – reduced integration, element distortions and error estimation. International Journal of Numerical Methods in Engineering, 28, 1487–1504. https://doi.org/10.1002/nme.1620280703
DOI: https://doi.org/10.1002/nme.1620280703
Google Scholar
Bathe, K. J. (2014). Finite Element Procedures. Second Edition, 341–389.
Google Scholar
Cook, R. D., Malkus, D. S., Plesha, M. E., & Witt R. J. (2002). Concepts and Applications of FEA, 4th ed. (98–102). John Wiley&Sons, Inc.
Google Scholar
Jones, R. M. (1999). Mechanics of Composite Materials. Second Edition, 55–73. Philadelphia: Taylor & Francis Group.
Google Scholar
Lekhnitskii, S. G. (1981). Theory of Elasticity of an Anisotropic Elastic Body. Mir Publishers.
Google Scholar
Lee, N. S., & Bathe, K. J. (1993). Effects of element distortions on the performance of isoparametric elements. International Journal of Numerical Methods in Engineering, 36, 3553–3576. https://doi.org/10.1002/nme.1620362009
DOI: https://doi.org/10.1002/nme.1620362009
Google Scholar
Liu, G. R. & Quek, S. S. (2014). The Finite Element Method. A Practical Course. Second Edition, 161–211. Elsevier.
DOI: https://doi.org/10.1016/B978-0-08-098356-1.00007-2
Google Scholar
Macneal, R. H., & Harder, R. L. (1985). A proposed standard set of problems to test finite element accuracy. Finite Elements in Analysis and Design, 1, 3–20. https://doi.org/10.1016/0168-874X(85)90003-4
DOI: https://doi.org/10.1016/0168-874X(85)90003-4
Google Scholar
Turcke, D. J., & McNeice, G. M. (1974). Guidelines for selecting finite element grids based on an optimization study. Computers & Structures, 4, 499–519. https://doi.org/10.1016/0045-7949(74)90003-0
DOI: https://doi.org/10.1016/0045-7949(74)90003-0
Google Scholar
Zienkiewicz, O. C., & Taylor, R. L. (2000). The Finite Element Method. Fifth Edition. Volume 1: The Basis, 164–198. Oxford, UK: Butterworth-Heinemann.
Google Scholar
Authors
Bartosz KAWECKIb.kawecki@pollub.pl
* Lublin University of Technology, Faculty of Civil Engineering and Architecture, Department of Structural Mechanics, Nadbystrzycka 40, 20-618 Lublin Poland
Authors
Jerzy PODGÓRSKILublin University of Technology, Faculty of Civil Engineering and Architecture, Department of Structural Mechanics, Nadbystrzycka 40, 20-618 Lublin, Poland
Statistics
Abstract views: 174PDF downloads: 24
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Leszek JASKIERNY, REVIEW OF THE DATA MODELING STANDARDS AND DATA MODEL TRANSFORMATION TECHNIQUES , Applied Computer Science: Vol. 14 No. 4 (2018)
- Mateusz Sawa, Mirosław Szala, Weronika Henzler, INNOVATIVE DEVICE FOR TENSILE STRENGTH TESTING OF WELDED JOINTS: 3D MODELLING, FEM SIMULATION AND EXPERIMENTAL VALIDATION OF TEST RIG – A CASE STUDY , Applied Computer Science: Vol. 17 No. 3 (2021)
- Michał BIAŁY, Marcin SZLACHETKA, CRANK-PISTON MODEL OF INTERNAL COMBUSTION ENGINE USING CAD/CAM/CAE IN THE MSC ADAMS , Applied Computer Science: Vol. 13 No. 1 (2017)
- Tomasz CHMIELEWSKI, Katarzyna ZIELIŃSKA, SURVEY OF REMOTELY CONTROLLED LABORATORIES FOR RESEARCH AND EDUCATION , Applied Computer Science: Vol. 13 No. 1 (2017)
- Marian JANCZAREK, Oleksij BULYANDRA, COMPUTER AIDED THERMAL PROCESSES IN TECHNICAL SPACES , Applied Computer Science: Vol. 13 No. 2 (2017)
- Martin KRAJČOVIČ, Patrik GRZNÁR, UTILISATION OF EVOLUTION ALGORITHM IN PRODUCTION LAYOUT DESIGN , Applied Computer Science: Vol. 13 No. 3 (2017)
- Łukasz WÓJCIK, Zbigniew PATER, LIMITING VALUE OF COCKROFT-LATHAM INTEGRAL FOR COMMERCIAL PLASTICINE , Applied Computer Science: Vol. 13 No. 4 (2017)
- Robert KARPIŃSKI, Jakub GAJEWSKI, Jakub SZABELSKI, Dalibor BARTA, APPLICATION OF NEURAL NETWORKS IN PREDICTION OF TENSILE STRENGTH OF ABSORBABLE SUTURES , Applied Computer Science: Vol. 13 No. 4 (2017)
- Rafał KLIZA, Karol ŚCISŁOWSKI, Ksenia SIADKOWSKA, Jacek PADYJASEK, Mirosław WENDEKER, STRENGTH ANALYSIS OF A PROTOTYPE COMPOSITE HELICOPTER ROTOR BLADE SPAR , Applied Computer Science: Vol. 18 No. 1 (2022)
- Tomasz BULZAK, Zbigniew PATER, Janusz TOMCZAK, NEW EXTRUSION PROCESS FOR PRODUCING TWIST DRILLS USING SPLIT DIES , Applied Computer Science: Vol. 13 No. 3 (2017)
You may also start an advanced similarity search for this article.
