DYNAMIC AND MATHEMATICAL MODELS OF THE HYDROIMPULSIVE VIBRO-CUTTING DEVICE WITH A PRESSURE PULSE GENERATOR BULT INTO THE RING SPRING
Roman Obertyukh
Vinnytsia National Technical University (Ukraine)
http://orcid.org/0000-0003-2939-6582
Andrіі Slabkyі
Vinnytsia National Technical University (Ukraine)
http://orcid.org/0000-0001-9284-2296
Leonid Polishchuk
leo.polishchuk@gmail.comVinnytsia National Technical University (Ukraine)
http://orcid.org/0000-0002-5916-2413
Oleksandr Povstianoi
Lutsk National Technical University (Ukraine)
http://orcid.org/0000-0002-1416-225X
Saule Kumargazhanova
D. Serikbayev East Kazakhstan Technical University (Kazakhstan)
http://orcid.org/0000-0002-6744-4023
Maxatbek Satymbekov
Al-Farabi Kazakh National University (Kazakhstan)
http://orcid.org/0000-0002-4621-6646
Abstract
Structural calculation scheme of the hydropulse device for vibration cutting with built-in ring with pressure pulse generator (PPG) is considered. On the basis of the structural scheme and cyclogram of the working cycle of the device, its dynamic and mathematical models were developed, in which the hydraulic link is represented by a visco-elastic model of the working fluid (energy carrier) composed of the inertial elastic and dissipative elements (Kelvin-Foyga's body).
Keywords:
mathematical model, dynamic model, hydropulse device, ring spring, frequency, amplitudeReferences
Abramov E. I. et al.: Elements of the hydraulic drive: reference book. Technics, Kiev 1977.
Google Scholar
Berezyuk O. V.: Mathematical modeling of the hydraulic drive dynamics of the working bodies of the container reversal during the loading of solid household waste in the garbage truck. Bulletin of Khmelnytsky National University 5, 2013.
Google Scholar
Bocharov Yu. A.: Fundamentals of the general theory of hydraulic forge-stamping machines. Machinery and technology of metal processing by pressure. Collection of scientific works MVTU 330, 1980, 12–40.
Google Scholar
Chuprakov Yu. I.: Hydraulic actuator and means of hydraulics. Engineering 1979.
Google Scholar
Cieplok G.: Estimation of the resonance amplitude in machines with inertia vibrator in the coast-down phase. Mechanics & Industry 19(102), 2018.
DOI: https://doi.org/10.1051/meca/2017035
Google Scholar
Danilchik S. S.: Vibration turning of structural steels. BNTU, Minsk 2018.
Google Scholar
Gursky V. et al.: Dynamic Analysis of an Enhanced Multi‐Frequency Inertial Exciter for Industrial Vibrating Machines. Machines 10(130), 2022.
DOI: https://doi.org/10.3390/machines10020130
Google Scholar
Iskovich-Lototskiy R. D. et al.: Pressure pulse generators for controlling the hydropulse drives of vibratory and vibration damping technological machines. UNIVERSUM, Vinnitsya 2008.
Google Scholar
Iskovich-Lototskiy R. D. et al.: Vibration and vibro-shock machines. Technics, Kiev 1982.
Google Scholar
Khmara L. A. et al.: Algorithm to calculate work tools of machines for performance in extreme working conditions. Mechatronic Systems I. Applicationsin Transport, Logistics, Diagnostics and Control. Taylor & Francis Group – CRC Press, New York 2021, 29–38.
DOI: https://doi.org/10.1201/9781003224136-3
Google Scholar
Kozlov L. et al.: Optimization of design parameters of a counterbalance valve for a hydraulic drive invariant to reversal loads. Mechatronic Systems I. Applications in Transport, Logistics, Diagnostics and Control. Taylor & Francis Group –CRC Press, New York 2021, 137–148.
DOI: https://doi.org/10.1201/9781003224136-12
Google Scholar
Kozlov L. G. et al.: Experimental research characteristics of counterbalance valve for hydraulic drive control system of mobile machine. Przegląd Elektrotechniczny 95(4), 2019, 104–109.
DOI: https://doi.org/10.15199/48.2019.04.18
Google Scholar
Obertyukh R. et al.: Mathematical Modeling of the Device for Radial Vibroturning. Advanced Manufacturing Processes II. Inter Partner, Springer, Cham. 2020.
DOI: https://doi.org/10.1007/978-3-030-68014-5_55
Google Scholar
Obertyukh R. et al.: Method of design calculation of a hydropulse device for strain hardening of materials. Przegląd Elektrotechniczny 4, 2019, 65–73.
DOI: https://doi.org/10.15199/48.2019.04.12
Google Scholar
Obertyukh R. R. et al.: Dynamic and mathematical models of the hydraulic-pulse device for deformation strengthening of materials. Proc. 10808, 2018.
Google Scholar
Obertyukh R. R. et al.: Pat No 76517 Ukraine, IPC (2013, 01) В23В 1/00. Hydropulse vibrationshock device for radial and axial vibration turning with integrated pulse generator type pressure valve. Applicant and owner of the Vinnytsia National Technical University. 10.01.2013. Bull No. 1.
Google Scholar
Polishchuk L. et al.: Mechatronic Systems II. Applications in Material Handling Processes and Robotics. Taylor & Francis Group – CRC Press, Boca Raton, London, New York, Leiden 2021.
DOI: https://doi.org/10.1201/9781003225447
Google Scholar
Ponomarev S. D., Andreeva L. E.: Calculation of elastic elements of machines and instruments. Machine-building, Moscow 1980.
Google Scholar
Roganov L. L., Karnaukh S. G.: Calculation of springs and elastic shock absorbers. DSEA, Kramatorsk 2000.
Google Scholar
Song T.: Rapid Calculation and Optimization of Vibration and Noise of Permanent-Magnet Synchronous Motors for EVs Based on Equivalent Structural Network. Machines 10(4), 2022, 281.
DOI: https://doi.org/10.3390/machines10040281
Google Scholar
Wójcik W. et al.: Mechatronic Systems I. Applications in Transport, Logistics, Diagnostics and Control. Taylor & Francis Group –CRC Press, London, New York 2021.
DOI: https://doi.org/10.1201/9781003224136
Google Scholar
Authors
Roman ObertyukhVinnytsia National Technical University Ukraine
http://orcid.org/0000-0003-2939-6582
Authors
Andrіі SlabkyіVinnytsia National Technical University Ukraine
http://orcid.org/0000-0001-9284-2296
Authors
Leonid Polishchukleo.polishchuk@gmail.com
Vinnytsia National Technical University Ukraine
http://orcid.org/0000-0002-5916-2413
Authors
Oleksandr PovstianoiLutsk National Technical University Ukraine
http://orcid.org/0000-0002-1416-225X
Authors
Saule KumargazhanovaD. Serikbayev East Kazakhstan Technical University Kazakhstan
http://orcid.org/0000-0002-6744-4023
Authors
Maxatbek SatymbekovAl-Farabi Kazakh National University Kazakhstan
http://orcid.org/0000-0002-4621-6646
Statistics
Abstract views: 329PDF downloads: 167
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Most read articles by the same author(s)
- Madina Bazarova, Waldemar Wójcik, Gulnaz Zhomartkyzy, Saule Kumargazhanova, Galina Popova , KNOWLEDGE TRANSFER AS ONE OF THE FACTORS OF INCREASING UNIVERSITY COMPETITIVENESS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 9 No. 3 (2019)
- Leonid Polishchuk, Leonid Kozlov, Yuri Burennikov, Vasil Strutinskiy, Valerii Kravchuk, APPLICATION OF HYDRAULIC AUTOMATION EQUIPMENT FOR THE EFFICIENCY ENHANCEMENT OF THE OPERATION ELEMENTS OF THE MOBILE MACHINERY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 9 No. 2 (2019)
- Leonid Polishchuk, Oleh Khmara , Oleh Piontkevych, Oksana Adler, Aigul Tungatarova , Ainur Kozbakova, DYNAMICS OF THE CONVEYOR SPEED STABILIZATION SYSTEM AT VARIABLE LOADS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 12 No. 2 (2022)
- Yosyp Bilynsky, Aleksandr Nikolskyy, Viktor Revenok, Vasyl Pogorilyi, Saule Smailova, Oksana Voloshina, Saule Kumargazhanova, CONVOLUTIONAL NEURAL NETWORKS FOR EARLY COMPUTER DIAGNOSIS OF CHILD DYSPLASIA , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 13 No. 2 (2023)
- Leonid Timchenko, Natalia Kokriatskaia, Volodymyr Tverdomed, Natalia Kalashnik, Iryna Shvarts, Vladyslav Plisenko, Dmytro Zhuk, Saule Kumargazhanova, LOCAL DIFFERENCE THRESHOLD LEARNING IN FILTERING NORMAL WHITE NOISE , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 13 No. 2 (2023)
- Anna Vitiuk, Leonid Polishchuk, Nataliia B. Savina, Oksana O. Adler, Gulzhan Kashaganova, Saule Kumargazhanova, ENGINEERING AND TECHNICAL ASSESSMENT OF THE COMPETITIVENESS OF UKRAINIAN MECHANICAL ENGINEERING ENTERPRISES BASED ON THE APPLICATION OF REGRESSION MODELS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 13 No. 3 (2023)
- Vira Petruk, Olena Prozor, Yuliia Sabadosh, Iryna Baranovska, Maksim Palii, Yevheniia Moroz, Saule Kumargazhanova, Dinara Mussayeva, STATISTICAL METHODS FOR EVALUATING EXPERIMENTAL DATA ON THE USE OF MATHEMATICAL COMPETENCIES IN STUDY FOR A RESILIENT ECONOMY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 13 No. 2 (2023)
- Anatoliy Zinkovskii, Kyrylo Savchenko, Yevheniia Onyshchenko, Leonid Polishchuk, Abilkaiyr Nazerke, Bagashar Zhumazhanov, FINITE ELEMENT MODEL FOR ANALYSIS OF CHARACTERISTICS OF SHROUDED ROTOR BLADE VIBRATIONS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 12 No. 4 (2022)
- Dmytro Milenin, Mykola Lysychenko, Andriy Milenin, Leonid Koval, Saltanat Amirgaliyeva, Maxatbek Satymbekov, Saltanat Adikanova, OPTIMIZATION OF RESOURCE ALLOCATION, EXPOSURE TIME AND ROTARY SPEED OF INCUBATIVE EGGS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 13 No. 2 (2023)
- Roman Kvуetnyy, Yuriy Bunyak, Olga Sofina, Volodymyr Kotsiubynskyi, Tetiana Piliavoz, Olena Stoliarenko, Saule Kumargazhanova, TENSOR AND VECTOR APPROACHES TO OBJECTS RECOGNITION BY INVERSE FEATURE FILTERS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 14 No. 1 (2024)
