ELECTRICAL RESISTANCE TOMOGRAPH FOR DISTRIBUTED MEASUREMENTS FOR FLOOD EMBANKMENT
Tomasz Rymarczyk
tomasz@rymarczyk.com1Research and Development Center, Netrix S.A., Lublin, 2University of Economics and Innovation in Lublin (Poland)
Paweł Tchórzewski
Research and Development Center, Netrix S.A., Lublin (Poland)
Przemysław Adamkiewicz
Research and Development Center, Netrix S.A., Lublin (Poland)
Jan Sikora
Research and Development Center, Netrix S.A., Lublin (Poland)
Abstract
In this paper the terrain electrical resistance tomograph was presented. Its aim is to verify the repeatability of test results by eliminating laboratory equipment, and to validate the use of simple and cheap electronics to the structure of the ERT. Electrical resistance tomography, which is based on measuring potential difference, can be used to calculate conductivity
Keywords:
electrical resistance tomography, sensors, measurementsReferences
Jones G., Sentenac P., Zielinski M.: Desiccation cracking detection using 2-D and 3-D Electrical Resistivity Tomography: Validation on a flood embankment. Journal of Applied Geophysics106/2014.
Google Scholar
Duda K., Adamkiewicz P., Rymarczyk T.: Nondestructive Method to Examine Brick Wall Dampness. International Interdisciplinary PhD Workshop 2016, 68–71.
Google Scholar
Filipowicz S.F., Rymarczyk T.: Measurement Methods and Image Reconstruction in Electrical Impedance Tomography. Przeglad Elektrotechniczny 88(6)/2012, 247–250.
Google Scholar
Kłosowski G., Kozłowski E., Gola A.: Integer linear programming in optimization of waste after cutting in the furniture manufacturing. Advances in Intelligent Systems and Computing 637/2018, 260–270.
Google Scholar
Kryszyn J., Smolik W.: Toolbox for 3D Modelling and Image Reconstruction in Electrical Capacitance Tomography. Automatyka, Pomiary w Gospodarce i Ochronie Środowiska 1/2017, 137–145.
Google Scholar
Polakowski K., Filipowicz S.F., Sikora J., Rymarczyk T.: Quality of imaging in multipath tomography. Przeglad Elektrotechniczny 85(12)/2009, 134–136.
Google Scholar
Polakowski K., Filipowicz S., Sikora J., Rymarczyk T.: Tomography Technology Application for Workflows of Gases Monitoring in The Automotive Systems, Przegląd Elektrotechniczny 84(12)/2008, 227–229.
Google Scholar
Rymarczyk T., Filipowicz S., Sikora J., Polakowski K.: A piecewise-constant minimal partition problem in the image reconstruction. Przegląd Elektrotechniczny 85(12)/2009, 141–143.
Google Scholar
Rymarczyk T., Sikora J., Waleska B.: Coupled Boundary Element Method and Level Set Function for Solving Inverse Problem in EIT. 7th World Congress on Industrial Process Tomography, WCIPT7 2013, 312–319.
Google Scholar
Smolik W.: Forward Problem Solver for Image Reconstruction by Nonlinear Optimization in Electrical Capacitance Tomography. Flow Measurement and Instrumentation 21/2010, 70–77.
Google Scholar
Soleimani M., Mitchell CN, Banasiak R., Wajman R., Adler A.: Four-dimensional electrical capacitance tomography imaging using experimental data. Progress In Electromagnetics Research 90/2009, 171–186.
Google Scholar
Wajman R., Banasiak R.: Tunnel-based method of sensitivity matrix calculation for 3D-ECT imaging. Sensor Review 34/2014, 273–283.
Google Scholar
Authors
Tomasz Rymarczyktomasz@rymarczyk.com
1Research and Development Center, Netrix S.A., Lublin, 2University of Economics and Innovation in Lublin Poland
Authors
Paweł TchórzewskiResearch and Development Center, Netrix S.A., Lublin Poland
Authors
Przemysław AdamkiewiczResearch and Development Center, Netrix S.A., Lublin Poland
Authors
Jan SikoraResearch and Development Center, Netrix S.A., Lublin Poland
Statistics
Abstract views: 223PDF downloads: 128
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Most read articles by the same author(s)
- Tomasz Rymarczyk, Jan Sikora, SOME MORE ON LOGARITHMIC SINGULARITY INTEGRATION IN BOUNDARY ELEMENT METOD , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 14 No. 1 (2024)
- Tomasz Rymarczyk, Grzegorz Kłosowski, SUPPLY CHAIN RISK MANAGEMENT BY MONTE CARLO METHOD , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 4 (2017)
- Tomasz Rymarczyk, Barbara Stefaniak, Przemysław Adamkiewicz, NEURAL NETWORK AND CONVOLUTIONAL ALGORITH TO EXTRACT SHAPES BY E-MEDICUS APPLICATION , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 8 No. 3 (2018)
- Tomasz Rymarczyk, Paweł Tchórzewski, HYBRID TECHNIQUES TO SOLVE OPTIMIZATION PROBLEMS IN EIT , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Tomasz Rymarczyk, Paweł Tchórzewski, Jan Sikora, COUPLING BOUNDARY ELEMENT METHOD WITH LEVEL SET METHOD TO SOLVE INVERSE PROBLEM , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 1 (2017)
- Krzysztof Król, Tomasz Rymarczyk, Konrad Niderla, Edward Kozłowski, SENSOR PLATFORM OF INDUSTRIAL TOMOGRAPHY FOR DIAGNOSTICS AND CONTROL OF TECHNOLOGICAL PROCESSES , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 13 No. 1 (2023)
- Tomasz Rymarczyk, Grzegorz Kłosowski, Tomasz Cieplak, THE USE OF PETRI NETS IN DECISION SUPPORT SYSTEMS BASED ON INTELLIGENT MULTIPLY SOURCE DATA ANALYSIS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 4 (2017)
- Michał Gołąbek, Tomasz Rymarczyk, DESIGN OF INNOVATIVE MEASUREMENT SYSTEMS IN ULTRASONIC TOMOGRAPHY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 12 No. 2 (2022)
- Edyta Łukasik, Beata Pańczyk, Jan Sikora, CALCULATION OF THE IMPROPER INTEGRALS FOR FOURIER BOUNDARY ELEMENT METHOD , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 3 No. 3 (2013)
- Tomasz Cieplak, Tomasz Rymarczyk, Grzegorz Kłosowski, USING MICROSERVICES ARCHITECTURE AS ANALYTICAL SYSTEM FOR ELECTRICAL IMPEDANCE TOMOGRAPHY IMAGING , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 8 No. 1 (2018)
