PRODUCTION PLANNING IN CONDITIONS OF MASS CUSTOMIZATION BASED ON THEORY OF CONSTRAINTS
Janusz MLECZKO
jmleczko@ath.bielsko.pl*University of Bielsko-Biała, Department of Industrial EngineeringWillowa 2, 43-309 Bielsko-Biała (Poland)
Paweł BOBIŃSKI
LiuGong Dressta Machinery, Stalowa Wola (Poland)
Abstract
In accordance with the requirements of the modern market, small and medium-sized enterprises (SMEs) need to offer a wide range of products tailored to the specific and individual requirements. The success of many enterprises, which work in mass production system and use economic effect of scale production slowly is a thing of the past. There are many enterprises, generally small and medium manufacturing in unit and small batch production, for which it is necessary to develop optimal methods of production planning, taking into account the flexible production requirements, matched to the time-varying customer’s demand. The article presents the production planning based on TOC in conditions of mass customization. Presented solutions are used in modern practice.
Keywords:
mass customization, computer aided planning, TOCReferences
Da Silveira, G., Borenstein, D., & Fogliatto, F. S. (2001). Mass customization: Literature review and research directions. Int. J. Production Economics, 72, 1–13. https://doi.org/10.1016/ S0925-5273(00)00079-7
DOI: https://doi.org/10.1016/S0925-5273(00)00079-7
Google Scholar
Fogliatto, F., Da Silveira, G. & Borenstein. D. (2012). The mass customization decade: An updated review of the literature. International Journal of Production Economics, 138, 14–25. https://doi.org/10.1016/ j.ijpe.2012.03.002
DOI: https://doi.org/10.1016/j.ijpe.2012.03.002
Google Scholar
Haug, A., Ladeby, K., & Edwards, K. (2009). From engineer‐ to‐ order to mass customization. Management Research News, 32(7), 633–644. https://doi.org/10.1108/01409170910965233
DOI: https://doi.org/10.1108/01409170910965233
Google Scholar
Kumar, A., (2007). Mass customization: manufacturing issues and taxonomic analyses. Int. J. Flex. Manuf. Syst., 19, 625–629. https://doi.org/10.1007/s10696-008-9049-5
DOI: https://doi.org/10.1007/s10696-008-9049-5
Google Scholar
Luo, X., Tu, Y., Tang, J., & Kwong, C. K., (2008). Optimizing customer’s selection for configurable product in B2C e-commerce application. Computers in Industry, 59, 767–776. https://doi.org/10.1016/j.compind.2008.03.003
DOI: https://doi.org/10.1016/j.compind.2008.03.003
Google Scholar
Mleczko, J., (2014). Manufacturing processes creating with use of dynamic classification in conditions of unit and small-batch production. Bielsko-Biała: Publishing House of University of Bielsko-Biała.
Google Scholar
Peng, D. G., Heim, G. (2011). Impacts of information technology on mass customization capability of manufacturing plants. International Journal of Operations& Production Management, 31(10), 1022–1047. https://doi.org/10.1108/01443571111182173
DOI: https://doi.org/10.1108/01443571111182173
Google Scholar
Tien, J. M., (2011). Manufacturing and services: From mass production to mass customization. Journal of Systems Science and Systems Engineering, 20(2), 129-154. https://doi.org/10.1007/s11518-011-5166-x
DOI: https://doi.org/10.1007/s11518-011-5166-x
Google Scholar
Authors
Janusz MLECZKOjmleczko@ath.bielsko.pl
*University of Bielsko-Biała, Department of Industrial EngineeringWillowa 2, 43-309 Bielsko-Biała Poland
Authors
Paweł BOBIŃSKILiuGong Dressta Machinery, Stalowa Wola Poland
Statistics
Abstract views: 48PDF downloads: 36
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Most read articles by the same author(s)
- Bartosz Cieśla, Janusz Mleczko, PRACTICAL APPLICATION OF FUZZY LOGIC IN PRODUCTION CONTROL SYSTEMS OF ENGINEER TO ORDER SMES , Applied Computer Science: Vol. 17 No. 1 (2021)
Similar Articles
- Tomasz NOWICKI, Adam GREGOSIEWICZ, Zbigniew ŁAGODOWSKI, PRODUCTIVITY OF A LOW-BUDGET COMPUTER CLUSTER APPLIED TO OVERCOME THE N-BODY PROBLEM , Applied Computer Science: Vol. 17 No. 4 (2021)
- Benjamin KOMMEY, Ernest Ofosu ADDO, Elvis TAMAKLOE, Eric Tutu TCHAO, Henry NUNOO-MENSAH, A SIX-PORT MEASUREMENT DEVICE FOR HIGH POWER MICROWAVE VECTOR NETWORK ANALYSIS , Applied Computer Science: Vol. 18 No. 3 (2022)
- Błażej BADZIO, Agnieszka BODZIAK, Bartłomiej BRODAWKA, Karol BUCHAJCZUK, Maria SKUBLEWSKA-PASZKOWSKA, Mariusz DZIEŃKOWSKI, Paweł POWROŹNIK, ANALYSIS OF THE USABILITY AND ACCESSIBILITY OF WEBSITES IN VIEW OF THEIR UNIVERSAL DESIGN PRINCIPLES , Applied Computer Science: Vol. 18 No. 3 (2022)
- Nataliya SHABLIY, Serhii LUPENKO, Nadiia LUTSYK, Oleh YASNIY, Olha MALYSHEVSKA, KEYSTROKE DYNAMICS ANALYSIS USING MACHINE LEARNING METHODS , Applied Computer Science: Vol. 17 No. 4 (2021)
- Jolanta Brzozowska, Arkadiusz Gola, COMPUTER AIDED ASSEMBLY PLANNING USING MS EXCEL SOFTWARE – A CASE STUDY , Applied Computer Science: Vol. 17 No. 2 (2021)
- Bartosz Cieśla, Janusz Mleczko, PRACTICAL APPLICATION OF FUZZY LOGIC IN PRODUCTION CONTROL SYSTEMS OF ENGINEER TO ORDER SMES , Applied Computer Science: Vol. 17 No. 1 (2021)
- Eduardo Sánchez-García, Javier Martínez-Falcó, Bartolomé Marco-Lajara, Jolanta Słoniec, ANALYZING THE ROLE OF COMPUTER SCIENCE IN SHAPING MODERN ECONOMIC AND MANAGEMENT PRACTICES. BIBLIOMETRIC ANALYSIS , Applied Computer Science: Vol. 20 No. 1 (2024)
- Katarzyna KUREK, Maria Skublewska-Paszkowska, Mariusz DZIENKOWSKI, Paweł POWROZNIK, THE IMPACT OF APPLYING UNIVERSAL DESIGN PRINCIPLES ON THE USABILITY OF ONLINE ACCOMMODATION BOOKING WEBSITES , Applied Computer Science: Vol. 20 No. 1 (2024)
- Sylwester KORGA, Marcin BARSZCZ, Krzysztof DZIEDZIC, DEVELOPMENT OF SOFTWARE FOR IDENTIFICATION OF FILAMENTS USED IN 3D PRINTING TECHNOLOGY , Applied Computer Science: Vol. 15 No. 1 (2019)
- Stanisław SKULIMOWSKI, Jerzy MONTUSIEWICZ, Marcin BADUROWICZ, ENHANCING THE EFFICIENCY OF THE LEVENSHTEIN DISTANCE BASED HEURISTIC METHOD OF ARRANGING 2D APICTORIAL ELEMENTS FOR INDUSTRIAL APPLICATIONS , Applied Computer Science: Vol. 19 No. 4 (2023)
You may also start an advanced similarity search for this article.
