APPLICATION OF SIMULATION RESEARCH TO ANALYSE THE PRODUCTION PROCESS IN TERMS OF SUSTAINABLE DEVELOPMENT
Agnieszka ZACHCIAŁ
za24915@zut.edu.plWest Pomeranian University of Technology in Szczecin, Faculty of Mechanical Engineering and Mechatronics, Mechanical Engineering, Szczecin (Poland)
Andrzej JARDZIOCH
West Pomeranian University of Technology in Szczecin, Faculty of Mechanical Engineering and Mechatronics, Mechanical Engineering, Szczecin (Poland)
Abstract
Sustainable development is an very important idea nowadays and it influences on many factors. It is very important to focus on the goals of sustainable development and implement them both in industry and in everyday life. The aim of the article is to analyse the impact of implementing an automatic conveyor belt transport system between the stands of an exemplary assembly line on sustainable development in economic and environmental terms. The analyzed production process consists of one production line with six assembly stations. The efficiency of individual design solutions and electricity consumption were adopted as the evaluation criteria. To compare the two processes, a simulation analysis was performed in the Plant Simulation program. First chapter is the introduction to the article. The second chapter describes the current applications of simulation tests. The third chapter describes the production system that is improved by adding conveyors. The next chapter compares the processes with and without the use of conveyors and presents how much energy must be used additionally by implementing conveyor belts, but also what energy savings can be obtained by installing additional stop sensors. The fifth chapter presents the conclusions: the conducted research allowed concluding that the implementation of conveyor belts affects a higher number of finished products at the same time as the transport of components is manual. However, the best solution is to use conveyors with stop sensors, and the power consumption is then low and more profitable for the enterprise.
Keywords:
sustainable development, process optimizationReferences
Adamczyk, J. (2009). Społeczna odpowiedzialność przedsiębiorstw. PWE.
Google Scholar
Conroy, M., & Berke, P. (2004). What makes a good sustainable development plan? An analysis of factors that influence principles of sustainable development. Environment and Planning A, 36, 1381–1396.
DOI: https://doi.org/10.1068/a367
Google Scholar
Gao, K., Huang, Y., Sadollah, A., & Wang, L. (2020). A review of energy-efficient scheduling in intelligent production systems. Complex & Intelligent Systems, 6(2), 237–49.
DOI: https://doi.org/10.1007/s40747-019-00122-6
Google Scholar
Gazzola, P., Del Campo, A. G., & Onyango, V. (2019). Going green vs going smart for sustainable development: Quo vadis. Journal of Cleaner Production, 214, 881–892.
DOI: https://doi.org/10.1016/j.jclepro.2018.12.234
Google Scholar
Jasiulewicz-Kaczmarek, M., & Gola, A. (2019). Maintenance 4.0 Technologies for Sustainable Manufacturing – an Overview. IFAC-PapersOnLine, 52(10), 91–96. https://doi.org/10.1016/j.ifacol.2019.10.005
DOI: https://doi.org/10.1016/j.ifacol.2019.10.005
Google Scholar
Jovane, F., Yoshikawa, H., Alting, L., Boer, C. R., Westkamper, E., Williams, D., & Paci, A. M. (2008). The incoming global technological and industrial revolution towards competitive sustainable manufacturing.
DOI: https://doi.org/10.1016/j.cirp.2008.09.010
Google Scholar
Journal of CIRP Annals – Manufacturing Technology, 57, 641–659.
Google Scholar
Kopas, M., & Paulikova, A. (2009). Specifics of belt conveyor as part of checkout counters and their impacts on operational staff. Lifting equipment in theory and practice, 2, 41–45.
Google Scholar
Kronenberg, J., & Bergier, T. (2010). Wyzwania zrównoważonego rozwoju w Polsce. Fundacja Sendzimira.
Google Scholar
Lee, C. K. M., Zhang, S., & Ng, K. K. H. (2019). In-Plant Logistics Simulation Model for the Catering Service Industry Towards Sustainable Development: A Case Study. Sustainability, 11(13), 3655. https://doi.org/10.3390/su11133655
DOI: https://doi.org/10.3390/su11133655
Google Scholar
Liu, C., Cai, W., Jia, S., Zhang, M., Guo, H., Hu, L., & Jiang, Z. (2018). Emergy-based evaluation and improvement for sustainable manufacturing systems considering resource efficiency and environment performance. Energy Conversion and Management, 177, 176-189. https://doi.org/10.1016/j.enconman.2018.09.039
DOI: https://doi.org/10.1016/j.enconman.2018.09.039
Google Scholar
May, G., Stahl, B., Taisch, M., & Prabhu, V. (2015). Multi-objective genetic algorithm for energy-efficient job shop scheduling. International Journal of Production Research, 53(23),7071–89.
DOI: https://doi.org/10.1080/00207543.2015.1005248
Google Scholar
Misztal, A. (2018). Zrównoważony rozwój polskich przedsiębiorstw-ewalucja. Handel Wewnętrzny, 2(373), 27–40.
Google Scholar
Mouzon, G., Yildirim, M. B., & Twomey, J. (2007). Operational methods for minimization of energy consumption of manufacturing equipment. International Journal of Production Research, 45(18–19), 4247–71.
DOI: https://doi.org/10.1080/00207540701450013
Google Scholar
Salih, T. M. (2003). Sustainable economic development and the environment. International Journal of Social Economics, 30(1/2), 153–162.
DOI: https://doi.org/10.1108/03068290310453655
Google Scholar
Seroka-Stolka, O. (2014). The development of green logistics for implementation sustainable development strategy in companies. Procedia- Social and Behavioral Sciences, 151, 302–309.
DOI: https://doi.org/10.1016/j.sbspro.2014.10.028
Google Scholar
Terelak-Tymczyna, A., Jardzioch, A., & Biniek, A. (2018). Planowanie procesu produkcyjnego zorientowane na efektywność energetyczną. In: Innowacje w Zarządzanie i inżynierii Produkcji (pp. 521–529). Oficyna Wydawnicza Polskiego Towarzystwa Zarządzania Produkcją.
Google Scholar
Topolski, M. (2018). A model for controlling the flow of materials in the production process. AUTOBUSY – Technika, Eksploatacja, Systemy Transportowe, 19(6), 1141–1144. https://doi.org/10.24136/atest.2018.242
DOI: https://doi.org/10.24136/atest.2018.242
Google Scholar
Tucki, K., Orynycz, O., Wasiak, A., Gola, A., & Mieszkalski, L. (2022). Potential Routes to the Sustainability of the Food Packaging Industry. Sustainability, 14(7), 3924. https://doi.org/10.3390/su14073924
DOI: https://doi.org/10.3390/su14073924
Google Scholar
Zhang, S. (2019). Research on improvement of belt conveyor performance. International Journal of Recent Advances Multidisciplinary Research, 6(04), 4828–4830.
Google Scholar
Authors
Agnieszka ZACHCIAŁza24915@zut.edu.pl
West Pomeranian University of Technology in Szczecin, Faculty of Mechanical Engineering and Mechatronics, Mechanical Engineering, Szczecin Poland
Authors
Andrzej JARDZIOCHWest Pomeranian University of Technology in Szczecin, Faculty of Mechanical Engineering and Mechatronics, Mechanical Engineering, Szczecin Poland
Statistics
Abstract views: 246PDF downloads: 99
License
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Most read articles by the same author(s)
- Andrzej Jardzioch, Wioletta Marczak, APPLICATION OF A FUZZY CONTROLLER IN THE PROCESS OF AUTOMATED POLYETHYLENE FILM THICKNESS CONTROL , Applied Computer Science: Vol. 17 No. 3 (2021)
Similar Articles
- Jack OLESEN, Carl-Emil Houmøller PEDERSEN, Markus Germann KNUDSEN, Sandra TOFT, Vladimir NEDBAILO, Johan PRISAK, Izabela Ewa NIELSEN, Subrata SAHA, JOINT EFFECT OF FORECASTING AND LOT-SIZING METHOD ON COST MINIMIZATION OBJECTIVE OF A MANUFACTURER: A CASE STUDY , Applied Computer Science: Vol. 16 No. 4 (2020)
- Ahmed A.H. HAQQANI, Seenu N, Mukund JANARDHANAN, Kuppan Chetty RM, EVALUATION OF ROBOTIC CLEANING TECHNOLOGIES: PRESERVING A BRITISH ICONIC BUILDING , Applied Computer Science: Vol. 16 No. 2 (2020)
- Weronika WACH, Kinga CHWALEBA, GAP FILLING ALGORITHM FOR MOTION CAPTURE DATA TO CREATE REALISTIC VEHICLE ANIMATION , Applied Computer Science: Vol. 20 No. 3 (2024)
- Nasir ALAWAD, Afaf ALSEADY, FUZZY CONTROLLER OF MODEL REDUCTION DISTILLATION COLUMN WITH MINIMAL RULES , Applied Computer Science: Vol. 16 No. 2 (2020)
- Danuta MIEDZIŃSKA, Ewelina MAŁEK, Arkadiusz POPŁAWSKI, NUMERICAL MODELLING OF RESINS USED IN STEREOLITOGRAPHY RAPID PROTOTYPING , Applied Computer Science: Vol. 15 No. 4 (2019)
- Maciej NABOŻNY, ASYNCHRONOUS INFORMATION DISTRIBUTION AND CLUSTER STATE SYNCHRONIZATION , Applied Computer Science: Vol. 14 No. 1 (2018)
- Rafał KWOKA, Janusz KOZAK, Michał MAJKA, TESTS OF HTS 2G SUPERCONDUCTING TAPES USING THE LABVIEW ENVIRONMENT , Applied Computer Science: Vol. 14 No. 1 (2018)
- Krzysztof OSTROWSKI, AN EFFECTIVE METAHEURISTIC FOR TOURIST TRIP PLANNING IN PUBLIC TRANSPORT NETWORKS , Applied Computer Science: Vol. 14 No. 2 (2018)
- Grzegorz KŁOSOWSKI, Tomasz KLEPKA, Agnieszka NOWACKA, NEURAL CONTROLLER FOR THE SELECTION OF RECYCLED COMPONENTS IN POLYMER-GYPSY MORTARS , Applied Computer Science: Vol. 14 No. 2 (2018)
- Paweł BAŁON, Edward REJMAN, Robert SMUSZ, Janusz SZOSTAK, Bartłomiej KIEŁBASA, HIGH SPEED MILLING IN THIN-WALLED AIRCRAFT STRUCTURES , Applied Computer Science: Vol. 14 No. 2 (2018)
<< < 2 3 4 5 6 7 8 9 10 11 > >>
You may also start an advanced similarity search for this article.
