LIMITING VALUE OF COCKROFT-LATHAM INTEGRAL FOR COMMERCIAL PLASTICINE

Altan, T., & Vazquez, V. (2000). New Concepts in die design – physical and computer modeling applications. Journalof Materials Processing Technology, 98, 212–223.
DOI: https://doi.org/10.1016/S0924-0136(99)00202-2   Google Scholar

Arikawa, T., & Kakimotoa, H. (2014). Prediction of surface crack in hot forging by numerical simulation. Procedia Engineering, 81, 474–479.
DOI: https://doi.org/10.1016/j.proeng.2014.10.025   Google Scholar

Assempour, A., & Razi, S. (2002). Determination of load and strain-stress distributions in hot closed die forging using the plasticine modeling technique. Archive of SID 2, 15, 167–172.
  Google Scholar

Assempour, A., & Razi, S. (2003). Physical modeling of extrusion process. Journal of Mechanical Ennineering, 4, 61–69.
  Google Scholar

Balasundar, I., Raghu, T., & Sudhakara, M. (2009). Equal channel angular pressing die to extrude a variety of materials. Materials and design, 30, 1050–1059. https://doi.org/10.1016/j.matdes.2008.06.057
DOI: https://doi.org/10.1016/j.matdes.2008.06.057   Google Scholar

Dębski, H., Lonkwic, P., & Rozylo, P. (2015). Numerical and experimental analysis of the progressive gear body with the use of finite-element method. Eksploatacja i Niezawodność –Main-tenance and Reliability, 17(4), 544–550.
DOI: https://doi.org/10.17531/ein.2015.4.9   Google Scholar

Dziubińska, A., & Gontarz, A. (2015). Limiting phenomena in a new forming process for two-rib plates. Metalurgija, 54(3), 555–558.
  Google Scholar

Fuertesa, J. P., Leóna, J., Luisa, C. J., Luria, R., Puertasa, I., & Salcedoa, D. (2015). Comparative study of the damage attained with different specimens by FEM. Procedia Engineering, 132, 319–325.
DOI: https://doi.org/10.1016/j.proeng.2015.12.501   Google Scholar

Gontarz, A., Łukasik, K., & Pater, Z. (2003). Technologia kształtowania i modelowania nowego procesu wytwarzania wkrętów szynowych. Lublin: Wydawnictwa Uczelniane Politechniki Lubelskiej.
  Google Scholar

Gontarz, A., & Piesiak, J. (2010). Model pękania według kryterium Cockrofta-Lathama dla stopu magnezu MA2 w warunkach kształtowania na gorąco. Obróbka Plastyczna Metali, 4, 217–227.
  Google Scholar

Gontarz, A., & Winiarski, G. (2015). Numerical and experimental study of producing flanges on hollowparts by extrusion with a movable sleeve. Archives of Metallurgy and Materials, 60, 1917–1921. https://doi.org/10.1515/amm-2015-0326
DOI: https://doi.org/10.1515/amm-2015-0326   Google Scholar

Komori, K., & Mizuno, K. (2009). Study on plastic deformation in cone type rotary piercing process using model piercing mill for modeling clay. Journal of Material Processing Technology, 209, 4994–5001. https://doi.org/10.1016/j.jmatprotec.2009.01.022
DOI: https://doi.org/10.1016/j.jmatprotec.2009.01.022   Google Scholar

Kowalczyk, L. (1995). Modelowanie fizykalne procesów obróbki plastycznej. Radom: Instytut Technologi I Eksploatacji.
  Google Scholar

Lis, K., Pater, Z., & Wojcik, L. (2016a). Plastometric tests for plasticine as physical modelling material. Open Engineering, 6, 653–659. https://doi.org/10.1515/eng-2016-0093
DOI: https://doi.org/10.1515/eng-2016-0093   Google Scholar

Lis, K., Pater, Z., & Wojcik, L. (2016b). Numerical analysis of a skew rolling process for producing a crankshaft preform. Open Engineering, 6, 581–584. https://doi.org/10.1515/eng-2016-0087
DOI: https://doi.org/10.1515/eng-2016-0087   Google Scholar

Moon, Y. H., & Van Tyne, C. J. (2000). Validation via FEM and plasticine modeling of upper bound criteria of a process induced side surface defect in forgings. Journal of Materials Processing Technology, 99, 185–196. https://doi.org/10.1016/S0924-0136(99)00417-3
DOI: https://doi.org/10.1016/S0924-0136(99)00417-3   Google Scholar

Pater, Z. (2010). Wartość graniczna całki Cockrofta-Lathama dla stali kolejowej gatunku R200. Hutnik, Wiadomości Hutnicze, 77(12), 702–705.
  Google Scholar

Pires, F. M. A., Song, N., & Wu, S. (2016). Numerical analysis of damage evolution for materials with tension-compression asymmetry. Procedia Structural Integrity, 1, 273–280. https://doi.org/10.1016/j.prostr.2016.02.037
DOI: https://doi.org/10.1016/j.prostr.2016.02.037   Google Scholar

Rasty, J., & Sofuoglu, H. (2000). Flow behavior of plasticine used in physical modeling of metal forming process. Tribology International, 33(8), 523–529. https://doi.org/10.1016/S0301-679X(00)00092-X
DOI: https://doi.org/10.1016/S0301-679X(00)00092-X   Google Scholar

Rozylo, P., & Wojcik, L. (2017). FEM and Experimental Based Analysis of the StampingProcess of Aluminum Alloy. Adv. Sci. Technol. Res. J., 11(3), 94–101. https://doi.org/10.12913/22998624/70691
DOI: https://doi.org/10.12913/22998624/70691   Google Scholar

Świątkowski, K. (1994a). Analiza badań modelowych z użyciem materiałów modelowych z użyciem materiałów woskowych. Obróbka Plastyczna Metali, 5, 5–14.
  Google Scholar

Świątkowski, K. (1994b). Własności mechaniczne woskowych materiałów modelowych. Obróbka Plastyczna, 5, 15–21.
  Google Scholar