ANALYSIS OF THE EFFECT OF PROJECTILE IMPACT ANGLE ON THE PUNCTURE OF A STEEL PLATE USING THE FINITE ELEMENT METHOD IN ABAQUS SOFTWARE
Abstract
This paper deals with the punctureability of a steel plate by a projectile at different angles of attack. The effect of the projectile angle on the force required to penetrate a plate made of A36 steel is presented using Finite Element Method calculation software. Using Abaqus software, a dynamic model of a projectile striking a plate was modelled and the force required to penetrate a 5 mm thick steel plate was presented. The introduction gives an overview of the genesis of the topic and a brief historical background. The chapter on numerical analysis presents the numerical model used and how the simulation was modelled. In the conclusions, a summary of the results was formulated and conclusions were drawn regarding the observations and insights of the analysis. The force required to penetrate the plate was observed to increase with increasing projectile angle of attack and it was found that, as the angle of the plate increased, the force required to penetrate increased.
Keywords:
FEM, Finite Element Method, dynamic analysis, ductile damage, AbaqusReferences
Askariani, S. S., & Garivani, S. (2020). More Details about Validation of Calibrated Parameters of Ductile Damage Model for A36 Steel Plates in Abaqus Software University of Bojnord. University of Bojnord.
Google Scholar
Aufmann, F. (2020 March, 17). Stahl – und Panzer-Platten – Stalowe i pancerne płyty. http://hauba.pl/stahl-undpanzer-platten-stalowe-i-pancerne-plyty
Google Scholar
Bathe, K. J. (1996). Finite Element Procedures. Prentice Hall.
Google Scholar
Børvik, T., Hopperstada, O. S., Langsetha, M., & ArneMaloa, K. (2003). Effect of target thickness in blunt projectile penetration of Weldox 460 E steel plates. International Journal of Impact Engineering, 28(4), 413–464. https://doi.org/10.1016/S0734-743X(02)00072-6
DOI: https://doi.org/10.1016/S0734-743X(02)00072-6
Google Scholar
Budzyński, A. (2006). Krótki wstęp do zastosowania Metody Elementów Skończonych (MES) do numerycznych obliczeń inżynierskich. Biuletyn „GM View”, 5/2006.
Google Scholar
Czołg lekki BT-SV-2 „Turtle”. (n.d.). Retrieved March 16, 2020 from https://pl.ww2facts.net/28359-light-tankbt-sv-2-turtle.html
Google Scholar
Fletcher, D. (2004). British Mark I Tank 1916. Osprey Publishing.
Google Scholar
Flis, L., & Sperski, M. (2011). Badania odporności balistycznej pancerzy ze stali 10GHMBA na ostrzał pociskami 12.7 mm. Zeszyty naukowe Akademii Marynarki Wojennej, 3(186), 27–42.
Google Scholar
Flis, L., & Sperski, M. (2012). Ocena wpływu kształtu wierzchołka pocisku na proces przebijania pancerzy stalowych. Zeszyty naukowe Akademii Marynarki Wojennej, 2(189), 29–44.
Google Scholar
Michulec, R., & Zientarzewski, M. (2006). T-34 – Mityczna broń (pp. 12–40). Wydawnictwo Armagedon.
Google Scholar
Nieoczym, A., & Drozd, K. (2021). Fractographic Assessment and FEM Energy Analysis of the Penetrability of a 6061-T Aluminum Ballistic Panel by a Fragment Simulating Projectile. Advances in Science and Technology Research Journal, 15(1), 50–57. https://doi.org/10.12913/22998624/129951
DOI: https://doi.org/10.12913/22998624/129951
Google Scholar
Rodriguez-Millan, M., Garcia-Gonzalez, D., Rusinek, A., & Arias, A. (2018). Perforation mechanics of 2024 aluminium protective plates subjected to impact by different nose shapes of projectiles. Thin-Walled Structures, 123, 1–10.
DOI: https://doi.org/10.1016/j.tws.2017.11.004
Google Scholar
Różyło, P. (2020a) Metoda elementów skończonych Praktyczne przykłady zagadnień statycznych i dynamicznych w programie Abaqus: Część 1. Wydawnictwo Politechniki Lubelskiej.
Google Scholar
Różyło, P. (2020b). Metoda elementów skończonych Praktyczne przykłady zagadnień statycznych i dynamicznych w programie Abaqus: Część 2. Wydawnictwo Politechniki Lubelskiej.
Google Scholar
Senthil, K., Iqbal, M. A., Arindam, B., Mittal, R., & Gupta, N. K. (2018). Ballistic resistance of 2024 aluminium plates against hemispherical sphere and blunt nose projectiles. Thin Walled Structures, 126, 94–105.
DOI: https://doi.org/10.1016/j.tws.2017.02.028
Google Scholar
Simulia, D. (2017). Abaqus 2017 documentation. Dassault Systemes Waltham. Steel Construction Manual (8th Edition, second revised edition). (1986). American Institute of Steel Construction.
Google Scholar
Tiwari, G., Iqbal, M. A., & Gupta, P. K. (2018). Energy absorption characteristics of thin aluminium plateagainst hemispherical nosed projectile impact. Thin-Walled Structures, 126, 246–257.
DOI: https://doi.org/10.1016/j.tws.2017.04.014
Google Scholar
Torecki, S., (1982). Przebijalność pocisku. W 1000 słów o broni i balistyce (pp. 177–179). Wydawnictwo Ministerstwa Obrony Narodowej.
Google Scholar
Tyutin, M. R., Botvinaa, L. R., & Petersen, T. B. (2020). Tensile damage evolution of structural steels with different structure. Procedia Structural Integrity, 28, 2148–2156. https://doi.org/10.1016/j.prostr.2020.11.042
DOI: https://doi.org/10.1016/j.prostr.2020.11.042
Google Scholar
Wagner, R. H. N. (2021). ABAQUS Tutorial: Damage for Ductile Metals – Material Model Explained – Ductile Damage. Project: ABAQUS – Material Model Explained – Video Series.
Google Scholar
Wiśniewski, A., & Żurowski, W. (2002). Amunicja i pancerze. Politechnika Radomska.
Google Scholar
Statistics
Abstract views: 230PDF downloads: 107
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Błażej CZAJKA, Patryk RÓŻYŁO, Hubert DĘBSKI, STABILITY AND FAILURE OF THIN-WALLED COMPOSITE STRUCTURES WITH A SQUARE CROSS-SECTION , Applied Computer Science: Vol. 18 No. 2 (2022)
- Irena NOWOTYŃSKA, Stanisław KUT, COMPARATIVE ANALYSIS OF THE IMPACT OF DIE DESIGN ON ITS LOAD AND DISTRIBUTION OF STRESS DURING EXTRUSION , Applied Computer Science: Vol. 14 No. 4 (2018)
- Stanisław SKULIMOWSKI, Jerzy MONTUSIEWICZ, Marcin BADUROWICZ, ENHANCING THE EFFICIENCY OF THE LEVENSHTEIN DISTANCE BASED HEURISTIC METHOD OF ARRANGING 2D APICTORIAL ELEMENTS FOR INDUSTRIAL APPLICATIONS , Applied Computer Science: Vol. 19 No. 4 (2023)
- Michał TOMCZYK, Anna PLICHTA, Mariusz MIKULSKI, APPLICATION OF WAVELET – NEURAL METHOD TO DETECT BACKLASH ZONE IN ELECTROMECHANICAL SYSTEMS GENERATING NOISES , Applied Computer Science: Vol. 15 No. 4 (2019)
- Krzysztof Michalczyk, Mariusz Warzecha, Robert Baran, A NEW METHOD FOR GENERATING VIRTUAL MODELS OF NONLINEAR HELICAL SPRINGS BASED ON A RIGOROUS MATHEMATICAL MODEL , Applied Computer Science: Vol. 19 No. 2 (2023)
- Bartosz KAWECKI, Jerzy PODGÓRSKI, NUMERICAL RESULTS QUALITY IN DEPENDENCE ON ABAQUS PLANE STRESS ELEMENTS TYPE IN BIG DISPLACEMENTS COMPRESSION TEST , Applied Computer Science: Vol. 13 No. 4 (2017)
- Robert KARPIŃSKI, Anna MACHROWSKA, Marcin MACIEJEWSKI, APPLICATION OF ACOUSTIC SIGNAL PROCESSING METHODS IN DETECTING DIFFERENCES BETWEEN OPEN AND CLOSED KINEMATIC CHAIN MOVEMENT FOR THE KNEE JOINT , Applied Computer Science: Vol. 15 No. 1 (2019)
- Ahmed A.H. HAQQANI, Seenu N, Mukund JANARDHANAN, Kuppan Chetty RM, EVALUATION OF ROBOTIC CLEANING TECHNOLOGIES: PRESERVING A BRITISH ICONIC BUILDING , Applied Computer Science: Vol. 16 No. 2 (2020)
- Marcin Badurowicz, Sebastian Łagowski, USAGE OF IOT EDGE APPROACH FOR ROAD QUALITY ANALYSIS , Applied Computer Science: Vol. 19 No. 1 (2023)
- Damian KOLNY, Dawid KURCZYK, Józef MATUSZEK, COMPUTER SUPPORT OF ERGONOMIC ANALYSIS OF WORKING CONDITIONS AT WORKSTATIONS , Applied Computer Science: Vol. 15 No. 1 (2019)
<< < 1 2 3 4 5 6 7 8 9 10 > >>
You may also start an advanced similarity search for this article.
