ANALYSIS OF THE EFFECT OF PROJECTILE IMPACT ANGLE ON THE PUNCTURE OF A STEEL PLATE USING THE FINITE ELEMENT METHOD IN ABAQUS SOFTWARE
Abstract
This paper deals with the punctureability of a steel plate by a projectile at different angles of attack. The effect of the projectile angle on the force required to penetrate a plate made of A36 steel is presented using Finite Element Method calculation software. Using Abaqus software, a dynamic model of a projectile striking a plate was modelled and the force required to penetrate a 5 mm thick steel plate was presented. The introduction gives an overview of the genesis of the topic and a brief historical background. The chapter on numerical analysis presents the numerical model used and how the simulation was modelled. In the conclusions, a summary of the results was formulated and conclusions were drawn regarding the observations and insights of the analysis. The force required to penetrate the plate was observed to increase with increasing projectile angle of attack and it was found that, as the angle of the plate increased, the force required to penetrate increased.
Keywords:
FEM, Finite Element Method, dynamic analysis, ductile damage, AbaqusReferences
Askariani, S. S., & Garivani, S. (2020). More Details about Validation of Calibrated Parameters of Ductile Damage Model for A36 Steel Plates in Abaqus Software University of Bojnord. University of Bojnord.
Google Scholar
Aufmann, F. (2020 March, 17). Stahl – und Panzer-Platten – Stalowe i pancerne płyty. http://hauba.pl/stahl-undpanzer-platten-stalowe-i-pancerne-plyty
Google Scholar
Bathe, K. J. (1996). Finite Element Procedures. Prentice Hall.
Google Scholar
Børvik, T., Hopperstada, O. S., Langsetha, M., & ArneMaloa, K. (2003). Effect of target thickness in blunt projectile penetration of Weldox 460 E steel plates. International Journal of Impact Engineering, 28(4), 413–464. https://doi.org/10.1016/S0734-743X(02)00072-6
DOI: https://doi.org/10.1016/S0734-743X(02)00072-6
Google Scholar
Budzyński, A. (2006). Krótki wstęp do zastosowania Metody Elementów Skończonych (MES) do numerycznych obliczeń inżynierskich. Biuletyn „GM View”, 5/2006.
Google Scholar
Czołg lekki BT-SV-2 „Turtle”. (n.d.). Retrieved March 16, 2020 from https://pl.ww2facts.net/28359-light-tankbt-sv-2-turtle.html
Google Scholar
Fletcher, D. (2004). British Mark I Tank 1916. Osprey Publishing.
Google Scholar
Flis, L., & Sperski, M. (2011). Badania odporności balistycznej pancerzy ze stali 10GHMBA na ostrzał pociskami 12.7 mm. Zeszyty naukowe Akademii Marynarki Wojennej, 3(186), 27–42.
Google Scholar
Flis, L., & Sperski, M. (2012). Ocena wpływu kształtu wierzchołka pocisku na proces przebijania pancerzy stalowych. Zeszyty naukowe Akademii Marynarki Wojennej, 2(189), 29–44.
Google Scholar
Michulec, R., & Zientarzewski, M. (2006). T-34 – Mityczna broń (pp. 12–40). Wydawnictwo Armagedon.
Google Scholar
Nieoczym, A., & Drozd, K. (2021). Fractographic Assessment and FEM Energy Analysis of the Penetrability of a 6061-T Aluminum Ballistic Panel by a Fragment Simulating Projectile. Advances in Science and Technology Research Journal, 15(1), 50–57. https://doi.org/10.12913/22998624/129951
DOI: https://doi.org/10.12913/22998624/129951
Google Scholar
Rodriguez-Millan, M., Garcia-Gonzalez, D., Rusinek, A., & Arias, A. (2018). Perforation mechanics of 2024 aluminium protective plates subjected to impact by different nose shapes of projectiles. Thin-Walled Structures, 123, 1–10.
DOI: https://doi.org/10.1016/j.tws.2017.11.004
Google Scholar
Różyło, P. (2020a) Metoda elementów skończonych Praktyczne przykłady zagadnień statycznych i dynamicznych w programie Abaqus: Część 1. Wydawnictwo Politechniki Lubelskiej.
Google Scholar
Różyło, P. (2020b). Metoda elementów skończonych Praktyczne przykłady zagadnień statycznych i dynamicznych w programie Abaqus: Część 2. Wydawnictwo Politechniki Lubelskiej.
Google Scholar
Senthil, K., Iqbal, M. A., Arindam, B., Mittal, R., & Gupta, N. K. (2018). Ballistic resistance of 2024 aluminium plates against hemispherical sphere and blunt nose projectiles. Thin Walled Structures, 126, 94–105.
DOI: https://doi.org/10.1016/j.tws.2017.02.028
Google Scholar
Simulia, D. (2017). Abaqus 2017 documentation. Dassault Systemes Waltham. Steel Construction Manual (8th Edition, second revised edition). (1986). American Institute of Steel Construction.
Google Scholar
Tiwari, G., Iqbal, M. A., & Gupta, P. K. (2018). Energy absorption characteristics of thin aluminium plateagainst hemispherical nosed projectile impact. Thin-Walled Structures, 126, 246–257.
DOI: https://doi.org/10.1016/j.tws.2017.04.014
Google Scholar
Torecki, S., (1982). Przebijalność pocisku. W 1000 słów o broni i balistyce (pp. 177–179). Wydawnictwo Ministerstwa Obrony Narodowej.
Google Scholar
Tyutin, M. R., Botvinaa, L. R., & Petersen, T. B. (2020). Tensile damage evolution of structural steels with different structure. Procedia Structural Integrity, 28, 2148–2156. https://doi.org/10.1016/j.prostr.2020.11.042
DOI: https://doi.org/10.1016/j.prostr.2020.11.042
Google Scholar
Wagner, R. H. N. (2021). ABAQUS Tutorial: Damage for Ductile Metals – Material Model Explained – Ductile Damage. Project: ABAQUS – Material Model Explained – Video Series.
Google Scholar
Wiśniewski, A., & Żurowski, W. (2002). Amunicja i pancerze. Politechnika Radomska.
Google Scholar
Statistics
Abstract views: 122PDF downloads: 72
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Damian KRASKA, Tomasz TRZEPIECIŃSKI, FINITE ELEMENT BASED PREDICTION OF DEFORMATION IN SHEET METAL FORMING PROCESS , Applied Computer Science: Vol. 14 No. 3 (2018)
- Rumesh Edirimanne, W Madushan Fernando, Peter Nielsen, H. Niles Perera, Amila Thibbotuwawa, OPTIMIZING UNMANNED AERIAL VEHICLE BASED FOOD DELIVERY THROUGH VEHICLE ROUTING PROBLEM: A COMPARATIVE ANALYSIS OF THREE DELIVERY SYSTEMS. , Applied Computer Science: Vol. 20 No. 1 (2024)
- Rafał KLIZA, Karol ŚCISŁOWSKI, Ksenia SIADKOWSKA, Jacek PADYJASEK, Mirosław WENDEKER, STRENGTH ANALYSIS OF A PROTOTYPE COMPOSITE HELICOPTER ROTOR BLADE SPAR , Applied Computer Science: Vol. 18 No. 1 (2022)
- Stanisław BŁAWUCKI, Kazimierz ZALESKI, CONSTRUCTION AND TECHNOLOGICAL ANALYSIS OF THE BROACH BLADE SHAPE USING THE FINITE ELEMENT METHOD , Applied Computer Science: Vol. 13 No. 1 (2017)
- Andrzej ŁUKASZEWICZ, Jerzy JÓZWIK, Kamil CYBUL, IMPACT OF FRICTION COEFFICIENT VARIATION ON TEMPERATURE FIELD IN ROTARY FRICTION WELDING OF METALS – FEM STUDY , Applied Computer Science: Vol. 19 No. 3 (2023)
- Svetlana RATNER, Pavel RATNER, DEA-BASED DYNAMIC ASSESSMENT OF REGIONAL ENVIRONMENTAL EFFICIENCY , Applied Computer Science: Vol. 13 No. 2 (2017)
- Łukasz SEMKŁO, Łukasz GIERZ, NUMERICAL AND EXPERIMENTAL ANALYSIS OF A CENTRIFUGAL PUMP WITH DIFFERENT ROTOR GEOMETRIES , Applied Computer Science: Vol. 18 No. 4 (2022)
- Marcin TOMCZYK, Barbara BOROWIK, Mariusz MIKULSKI, IDENTIFICATION OF A BACKLASH ZONE IN AN ELECTROMECHANICAL SYSTEM CONTAINING CHANGES OF A MASS INERTIA MOMENT BASED ON A WAVELET–NEURAL METHOD , Applied Computer Science: Vol. 14 No. 4 (2018)
- Andrij MILENIN, PARALLEL SOLUTION OF THERMOMECHANICAL INVERSE PROBLEMS FOR LASER DIELESS DRAWING OF ULTRA-THIN WIRE , Applied Computer Science: Vol. 18 No. 3 (2022)
- Nataliya SHABLIY, Serhii LUPENKO, Nadiia LUTSYK, Oleh YASNIY, Olha MALYSHEVSKA, KEYSTROKE DYNAMICS ANALYSIS USING MACHINE LEARNING METHODS , Applied Computer Science: Vol. 17 No. 4 (2021)
You may also start an advanced similarity search for this article.
