ANALYSIS OF THE EFFECT OF PROJECTILE IMPACT ANGLE ON THE PUNCTURE OF A STEEL PLATE USING THE FINITE ELEMENT METHOD IN ABAQUS SOFTWARE
Abstract
This paper deals with the punctureability of a steel plate by a projectile at different angles of attack. The effect of the projectile angle on the force required to penetrate a plate made of A36 steel is presented using Finite Element Method calculation software. Using Abaqus software, a dynamic model of a projectile striking a plate was modelled and the force required to penetrate a 5 mm thick steel plate was presented. The introduction gives an overview of the genesis of the topic and a brief historical background. The chapter on numerical analysis presents the numerical model used and how the simulation was modelled. In the conclusions, a summary of the results was formulated and conclusions were drawn regarding the observations and insights of the analysis. The force required to penetrate the plate was observed to increase with increasing projectile angle of attack and it was found that, as the angle of the plate increased, the force required to penetrate increased.
Keywords:
FEM, Finite Element Method, dynamic analysis, ductile damage, AbaqusReferences
Askariani, S. S., & Garivani, S. (2020). More Details about Validation of Calibrated Parameters of Ductile Damage Model for A36 Steel Plates in Abaqus Software University of Bojnord. University of Bojnord.
Google Scholar
Aufmann, F. (2020 March, 17). Stahl – und Panzer-Platten – Stalowe i pancerne płyty. http://hauba.pl/stahl-undpanzer-platten-stalowe-i-pancerne-plyty
Google Scholar
Bathe, K. J. (1996). Finite Element Procedures. Prentice Hall.
Google Scholar
Børvik, T., Hopperstada, O. S., Langsetha, M., & ArneMaloa, K. (2003). Effect of target thickness in blunt projectile penetration of Weldox 460 E steel plates. International Journal of Impact Engineering, 28(4), 413–464. https://doi.org/10.1016/S0734-743X(02)00072-6
DOI: https://doi.org/10.1016/S0734-743X(02)00072-6
Google Scholar
Budzyński, A. (2006). Krótki wstęp do zastosowania Metody Elementów Skończonych (MES) do numerycznych obliczeń inżynierskich. Biuletyn „GM View”, 5/2006.
Google Scholar
Czołg lekki BT-SV-2 „Turtle”. (n.d.). Retrieved March 16, 2020 from https://pl.ww2facts.net/28359-light-tankbt-sv-2-turtle.html
Google Scholar
Fletcher, D. (2004). British Mark I Tank 1916. Osprey Publishing.
Google Scholar
Flis, L., & Sperski, M. (2011). Badania odporności balistycznej pancerzy ze stali 10GHMBA na ostrzał pociskami 12.7 mm. Zeszyty naukowe Akademii Marynarki Wojennej, 3(186), 27–42.
Google Scholar
Flis, L., & Sperski, M. (2012). Ocena wpływu kształtu wierzchołka pocisku na proces przebijania pancerzy stalowych. Zeszyty naukowe Akademii Marynarki Wojennej, 2(189), 29–44.
Google Scholar
Michulec, R., & Zientarzewski, M. (2006). T-34 – Mityczna broń (pp. 12–40). Wydawnictwo Armagedon.
Google Scholar
Nieoczym, A., & Drozd, K. (2021). Fractographic Assessment and FEM Energy Analysis of the Penetrability of a 6061-T Aluminum Ballistic Panel by a Fragment Simulating Projectile. Advances in Science and Technology Research Journal, 15(1), 50–57. https://doi.org/10.12913/22998624/129951
DOI: https://doi.org/10.12913/22998624/129951
Google Scholar
Rodriguez-Millan, M., Garcia-Gonzalez, D., Rusinek, A., & Arias, A. (2018). Perforation mechanics of 2024 aluminium protective plates subjected to impact by different nose shapes of projectiles. Thin-Walled Structures, 123, 1–10.
DOI: https://doi.org/10.1016/j.tws.2017.11.004
Google Scholar
Różyło, P. (2020a) Metoda elementów skończonych Praktyczne przykłady zagadnień statycznych i dynamicznych w programie Abaqus: Część 1. Wydawnictwo Politechniki Lubelskiej.
Google Scholar
Różyło, P. (2020b). Metoda elementów skończonych Praktyczne przykłady zagadnień statycznych i dynamicznych w programie Abaqus: Część 2. Wydawnictwo Politechniki Lubelskiej.
Google Scholar
Senthil, K., Iqbal, M. A., Arindam, B., Mittal, R., & Gupta, N. K. (2018). Ballistic resistance of 2024 aluminium plates against hemispherical sphere and blunt nose projectiles. Thin Walled Structures, 126, 94–105.
DOI: https://doi.org/10.1016/j.tws.2017.02.028
Google Scholar
Simulia, D. (2017). Abaqus 2017 documentation. Dassault Systemes Waltham. Steel Construction Manual (8th Edition, second revised edition). (1986). American Institute of Steel Construction.
Google Scholar
Tiwari, G., Iqbal, M. A., & Gupta, P. K. (2018). Energy absorption characteristics of thin aluminium plateagainst hemispherical nosed projectile impact. Thin-Walled Structures, 126, 246–257.
DOI: https://doi.org/10.1016/j.tws.2017.04.014
Google Scholar
Torecki, S., (1982). Przebijalność pocisku. W 1000 słów o broni i balistyce (pp. 177–179). Wydawnictwo Ministerstwa Obrony Narodowej.
Google Scholar
Tyutin, M. R., Botvinaa, L. R., & Petersen, T. B. (2020). Tensile damage evolution of structural steels with different structure. Procedia Structural Integrity, 28, 2148–2156. https://doi.org/10.1016/j.prostr.2020.11.042
DOI: https://doi.org/10.1016/j.prostr.2020.11.042
Google Scholar
Wagner, R. H. N. (2021). ABAQUS Tutorial: Damage for Ductile Metals – Material Model Explained – Ductile Damage. Project: ABAQUS – Material Model Explained – Video Series.
Google Scholar
Wiśniewski, A., & Żurowski, W. (2002). Amunicja i pancerze. Politechnika Radomska.
Google Scholar
Statistics
Abstract views: 230PDF downloads: 107
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Paweł PIEŚKO, Magdalena ZAWADA-MICHAŁOWSKA, USEFULNESS OF MODAL ANALYSIS FOR EVALUATION OF MILLING PROCESS STABILITY , Applied Computer Science: Vol. 13 No. 1 (2017)
- Marcin TOMCZYK, Barbara BOROWIK, Bohdan BOROWIK, IDENTIFICATION OF THE MASS INERTIA MOMENT IN AN ELECTROMECHANICAL SYSTEM BASED ON WAVELET–NEURAL METHOD , Applied Computer Science: Vol. 14 No. 2 (2018)
- Tomasz BULZAK, Zbigniew PATER, Janusz TOMCZAK, NEW EXTRUSION PROCESS FOR PRODUCING TWIST DRILLS USING SPLIT DIES , Applied Computer Science: Vol. 13 No. 3 (2017)
- Jack OLESEN, Carl-Emil Houmøller PEDERSEN, Markus Germann KNUDSEN, Sandra TOFT, Vladimir NEDBAILO, Johan PRISAK, Izabela Ewa NIELSEN, Subrata SAHA, JOINT EFFECT OF FORECASTING AND LOT-SIZING METHOD ON COST MINIMIZATION OBJECTIVE OF A MANUFACTURER: A CASE STUDY , Applied Computer Science: Vol. 16 No. 4 (2020)
- Robert KARPIŃSKI, Przemysław KRAKOWSKI, Józef JONAK, Anna MACHROWSKA, Marcin MACIEJEWSKI, COMPARISON OF SELECTED CLASSIFICATION METHODS BASED ON MACHINE LEARNING AS A DIAGNOSTIC TOOL FOR KNEE JOINT CARTILAGE DAMAGE BASED ON GENERATED VIBROACOUSTIC PROCESSES , Applied Computer Science: Vol. 19 No. 4 (2023)
- Roman GALAGAN, Serhiy ANDREIEV, Nataliia STELMAKH, Yaroslava RAFALSKA, Andrii MOMOT, AUTOMATION OF POLYCYSTIC OVARY SYNDROME DIAGNOSTICS THROUGH MACHINE LEARNING ALGORITHMS IN ULTRASOUND IMAGING , Applied Computer Science: Vol. 20 No. 2 (2024)
- Jakub ANCZARSKI, Adrian BOCHEN, MArcin GŁĄB, Mikolaj JACHOWICZ, Jacek CABAN, Radosław CECHOWICZ, A METHOD OF VERIFYING THE ROBOT'S TRAJECTORY FOR GOALS WITH A SHARED WORKSPACE , Applied Computer Science: Vol. 18 No. 1 (2022)
- Quirino ESTRADA, Dariusz SZWEDOWICZ, Julio C. VERGARA, José SOLIS, Miguel A. PAREDES, Lara WIEBE, Jesús M. SILVA, NUMERICAL SIMULATIONS OF SANDWICH STRUCTURES UNDER LATERAL COMPRESSION , Applied Computer Science: Vol. 15 No. 2 (2019)
- Paweł BAŁON, Edward REJMAN, Bartłomiej KIEŁBASA, Janusz SZOSTAK, Robert SMUSZ, NUMERICAL AND EXPERIMENTAL ANALYSIS OF THE STRENGTH OF TANKS DEDICATED TO HOT UTILITY WATER , Applied Computer Science: Vol. 14 No. 4 (2018)
- Saleh ALBAHLI, A DEEP ENSEMBLE LEARNING METHOD FOR EFFORT-AWARE JUST-IN-TIME DEFECT PREDICTION , Applied Computer Science: Vol. 16 No. 3 (2020)
<< < 1 2 3 4 5 6 7 8 9 10 > >>
You may also start an advanced similarity search for this article.
