EXTENDED KALMAN FILTER AS A FULL STATE OBSERVER IN APPLICATION OF THE INERTIA WHEEL PENDULUM
Article Sidebar
Open full text
Published:
May 16, 2013
Issue Vol. 3 No. 2 (2013)
Articles
-
OVERVIEW OF METHODS FOR SYNCHRONIZING WITH THE POWER GIRD (PLL) FOR POWER CONVERTERS
5-8
-
DATA REDUCTION VERSUS FEATURE SELECTION IN APPLICATION OF DAILY MAXIMUM POWER LOAD FORECASTING
9-12
-
MAGNETIC THERAPY: REMOTE CONTROLLING MICROPROCESSOR SYSTEM FOR MAGNETOTHERAPY
13-17
-
DESIGN OF 7-BIT LOW-POWER, LOW AREA A/D CONVERTER IN SUBMICRON PROCESS FOR MULTICHANNEL SYSTEMS
18-21
-
AN INTEGRATED RISK INFORMED DECISION MAKING IN THE NUCLEAR INDUSTRY
22-34
-
ELEMENTS OF AUTOMATIC CONTROL OF HYDRODYNAMIC SYSTEMS
35-36
-
AUGMENTED REALITY – THE WAY TO USING ADVANCED TECHNOLOGY IN NORMAL LIFE
37-40
-
INDUCTANCE CALCULATION CONSIDERING MAGNETIC SATURATION OF INTERIOR PERMANENT MAGNET SYNCHRONOUS MACHINES
41-44
-
EXTENDED KALMAN FILTER AS A FULL STATE OBSERVER IN APPLICATION OF THE INERTIA WHEEL PENDULUM
45-48
Main Article Content
DOI
Authors
Abstract
This paper presents derivation of the full state observer for an inverted, inertia wheel pendulum (IWP). This is a non-linear, underactuated mechanical system and therefore it has more degrees of freedom than control variables. In order to control this mechanical system properly, knowledge of all state variables is needed. In this paper, authors presented IWP’s model, which was later written in matrix form. Finally, based on the model, full state observer was derived. In the end its results were shown.
Keywords:
Inertia wheel pendulum, Extended Kalman Filter
Article Details
Gośliński, J. ., & Owczarkowski, A. . (2013). EXTENDED KALMAN FILTER AS A FULL STATE OBSERVER IN APPLICATION OF THE INERTIA WHEEL PENDULUM. Informatyka, Automatyka, Pomiary W Gospodarce I Ochronie Środowiska, 3(2), 45–48. https://doi.org/10.35784/iapgos.1452
