CONSTRUCTION OF AN ULTRASONIC TOMOGRAPH FOR ANALYSIS OF TECHNOLOGICAL PROCESSES IN THE FIELD OF REFLECTION AND TRANSMISSION WAVES
Tomasz Rymarczyk
tomasz@rymarczyk.com1. Research & Development Centre Netrix SA; 2. University of Economics and Innovation in Lublin (Poland)
https://orcid.org/0000-0002-3524-9151
Michał Gołąbek
Research & Development Centre Netrix SA (Poland)
https://orcid.org/0000-0002-2696-505X
Piotr Lesiak
University of Economics and Innovation in Lublin (Poland)
https://orcid.org/0000-0002-9792-3463
Andrzej Marciniak
University of Economics and Innovation in Lublin (Poland)
https://orcid.org/0000-0002-2718-4802
Mirosław Guzik
University of Economics and Innovation in Lublin (Poland)
https://orcid.org/0000-0003-3351-9039
Abstract
This article presents the ultrasonic structure for the analysis of technological processes in the field of reflective and transmission waves. Ultrasound tomography enables the analysis of processes occurring in the examined object without interfering with its interior through appropriate acquisition and analysis of data. The design goal is to verify the repeatability of measurement results by eliminating laboratory equipment. The ultrasonic tomograph has been designed in a modular way and consists of a motherboard connected to an analog signal conditioning board, a liquid crystal display with an integrated graphics processor and a high voltage pulser with a 64 channel multiplexer. The solution was designed for tomographic measurements of technological process properties.
Keywords:
ultrasound tomography, sensors, measurementsReferences
Babout L., Grudzień K., Wiącek J., Niedostatkiewicz M., Karpiński B., Szkodo M.: Selection of material for X-ray tomography analysis and DEM simulations: comparison between granular materials of biological and non-biological origins. Granul. Matter 20(3)/2018, 38.
DOI: https://doi.org/10.1007/s10035-018-0809-y
Google Scholar
Chaniecki Z., Romanowski A., Nowakowski J., Niedostatkiewicz M.: Application of twin-plane ECT sensor for identification of the internal imperfections inside concrete beams Grudzien. IEEE Instrumentation and Measurement Technology Conference 2016, 7520512.
Google Scholar
Duda K., Adamkiewicz P., Rymarczyk T., Niderla K.: Nondestructive Method to Examine Brick Wall Dampness. International Interdisciplinary PhD Workshop, Brno, 2016, 68–71.
Google Scholar
Fiala P., Drexler P., Nešpor D., Szabó Z., Mikulka J., Polívka J.: The Evaluation of Noise Spectroscopy Tests. Entropy 18(12)/2016, 1–16.
DOI: https://doi.org/10.3390/e18120443
Google Scholar
Gudra T., Opieliński K. J.: The multi–element probes for ultrasound transmission tomography. Journal de Physique 4(137)/2006, 79–86.
DOI: https://doi.org/10.1051/jp4:2006137015
Google Scholar
Golabek M., Rymarczyk T., Adamkiewicz P.: Construction of ultrasonic reflection tomograph for analysis of technological processes, Applications of Electromagnetics in Modern Engineering and Medicine. XXIX Sympozjum PTZE 2019, 47–51.
DOI: https://doi.org/10.23919/PTZE.2019.8781705
Google Scholar
Herman G.T.: Image Reconstruction from Projections: The Fundamentals of Computerized Tomography. Academic Press, New York 1980.
Google Scholar
Jiang Y., Soleimani M., Wang B.: Contactless electrical impedance and ultrasonic tomography, correlation, comparison and complementary study. Measurement Science and Technology 30/2019, 114001.
DOI: https://doi.org/10.1088/1361-6501/ab2292
Google Scholar
Kaczmarz S.: Angenäherte Auflösung von Systemen Linearer Gleichungen. Bull. Acad. Polon. Sci. Lett. A, 6–8A/1937, 355–357.
Google Scholar
Kak A. C., Slaney M.: Principles of Computerized Tomographic Imaging. IEEE Press, New York 1999.
Google Scholar
Kryszyn J., Wanta D. M., Smolik W. T.: Gain Adjustment for Signal-to-Noise Ratio Improvement in Electrical Capacitance Tomography System EVT4. IEEE Sens. J. 17(24)/2017, 8107–8116.
DOI: https://doi.org/10.1109/JSEN.2017.2744985
Google Scholar
Kryszyn J., Smolik W.: Toolbox for 3d modelling and image reconstruction in electrical capacitance tomography. Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska – IAPGOŚ 7(1)/2017, 137–145.
Google Scholar
Lopato P., Chady T., Sikora R., Ziolkowski M.: Full wave numerical modelling of terahertz systems for nondestructive evaluation of dielectric structures. COMPEL – The international journal for computation and mathematics in electrical and electronic engineering 32(3)/2013, 736–749.
DOI: https://doi.org/10.1108/03321641311305719
Google Scholar
Majchrowicz M., Kapusta P., Jackowska-Strumiłło L., Sankowski D.: Optimization of Distributed Multi-node, Multi-GPU, Heterogeneous System for 3D Image Reconstruction in Electrical Capacitance Tomography. Image processing & communications 21(3)/2016, 81–90.
DOI: https://doi.org/10.1515/ipc-2016-0018
Google Scholar
Nowakowski J., Ostalczyk, P., Sankowski D.: Application of fractional calculus for modelling of two-phase gas/liquid flow system. Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska – IAPGOŚ 7(1)/2017, 42–45.
DOI: https://doi.org/10.5604/01.3001.0010.4580
Google Scholar
Polakowski K., Sikora J.: Podstawy matematyczne obrazowania ultradźwiękowego. Politechnika Lubelska, Lublin 2016.
Google Scholar
Romanowski A., Łuczak P., Grudzień K.: X-ray Imaging Analysis of Silo Flow Parameters Based on Trace Particles Using Targeted Crowdsourcing. Sensors 19(15)/2019, 3317.
DOI: https://doi.org/10.3390/s19153317
Google Scholar
Rymarczyk T., Kłosowski G.: Innovative methods of neural reconstruction for tomographic images in maintenance of tank industrial reactors. Eksploatacja i Niezawodność – Maintenance and Reliability 21(2)/2019, 261–267.
DOI: https://doi.org/10.17531/ein.2019.2.10
Google Scholar
Rymarczyk T., Filipowicz S. F., Sikora J.: Level Set Method for Inverse Problem Solution In Electrical Impedance Tomography. Journal Proceedings of the XII International Conference on Electrical Bioimpedance & V Electrical Impedance Tomography, 2004, 519–522.
Google Scholar
Rymarczyk T., Kozłowski E., Kłosowski G., Niderla K.: Logistic Regression for Machine Learning in Process Tomography. Sensors 19/2019, 3400.
DOI: https://doi.org/10.3390/s19153400
Google Scholar
Rymarczyk T., Szumowski K., Adamkiewicz P., Tchórzewski P., Sikora J.: Moisture Wall Inspection Using Electrical Tomography Measurements. Przegląd Elektrotechniczny 94/2018, 97–100.
Google Scholar
Rymarczyk T., Nita P., Vejar A., Stefaniak B., Sikora J.: Electrical tomography system for Innovative Imaging and Signal Analysis. Przegląd Elektrotechniczny 95(6)/2019, 133–136.
DOI: https://doi.org/10.15199/48.2019.06.24
Google Scholar
Soleimani M., Mitchell C. N., Banasiak R., Wajman R., Adler A.: Four-dimensional electrical capacitance tomography imaging using experimental data. Progress in Electromagnetics Research 90/2009, 171–186.
DOI: https://doi.org/10.2528/PIER09010202
Google Scholar
Szczęsny A., Korzeniewska E.: Selection of the method for the earthing resistance measurement. Przegląd Elektrotechniczny 94(12)/2018, 178–181.
Google Scholar
Vališ D., Hasilová K., Forbelská M., Vintr Z.: Reliability modelling and analysis of water distribution network based on backpropagation recursive processes with real field data. Measurement 149/2020, 107026
DOI: https://doi.org/10.1016/j.measurement.2019.107026
Google Scholar
Wajman R., Fiderek P., Fidos H., Sankowski D., Banasiak R.: Metrological evaluation of a 3D electrical capacitance tomography measurement system for two-phase flow fraction determination. Measurement Science and Technology 24(6)/2013, 065302.
DOI: https://doi.org/10.1088/0957-0233/24/6/065302
Google Scholar
Wang M.: Industrial Tomography: Systems and Applications. Elsevier 2015.
Google Scholar
Ye Z., Banasiak R., Soleimani M.: Planar array 3D electrical capacitance tomography. Insight: Non-Destructive Testing and Condition Monitoring 55(12)/2013, 675–680.
DOI: https://doi.org/10.1784/insi.2012.55.12.675
Google Scholar
Ziolkowski M., Gratkowski S., Zywica A. R.: Analytical and numerical models of the magnetoacoustic tomography with magnetic induction. COMPEL – The international journal for computation and mathematics in electrical and electronic engineering 37(2)/2018, 538–548.
DOI: https://doi.org/10.1108/COMPEL-12-2016-0530
Google Scholar
Authors
Tomasz Rymarczyktomasz@rymarczyk.com
1. Research & Development Centre Netrix SA; 2. University of Economics and Innovation in Lublin Poland
https://orcid.org/0000-0002-3524-9151
Authors
Michał GołąbekResearch & Development Centre Netrix SA Poland
https://orcid.org/0000-0002-2696-505X
Authors
Piotr LesiakUniversity of Economics and Innovation in Lublin Poland
https://orcid.org/0000-0002-9792-3463
Authors
Andrzej MarciniakUniversity of Economics and Innovation in Lublin Poland
https://orcid.org/0000-0002-2718-4802
Authors
Mirosław GuzikUniversity of Economics and Innovation in Lublin Poland
https://orcid.org/0000-0003-3351-9039
Statistics
Abstract views: 468PDF downloads: 212
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Most read articles by the same author(s)
- Grzegorz Kłosowski, Tomasz Rymarczyk, USING NEURAL NETWORKS AND DEEP LEARNING ALGORITHMS IN ELECTRICAL IMPEDANCE TOMOGRAPHY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 3 (2017)
- Tomasz Rymarczyk, Tomasz Cieplak, Grzegorz Kłosowski, Paweł Rymarczyk, DESIGN OF DATA ANALYSIS SYSTEMS FOR BUSINESS PROCESS AUTOMATION , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 8 No. 3 (2018)
- Tomasz Rymarczyk, Grzegorz Kłosowski, THE USE OF ARTIFICIAL INTELLIGENCE IN AUTOMATED IN-HOUSE LOGISTICS CENTRES , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 8 No. 1 (2018)
- Tomasz Rymarczyk, Bartek Przysucha, Marcin Kowalski, Piotr Bednarczuk, ANALYSIS OF DATA FROM MEASURING SENSORS FOR PREDICTION IN PRODUCTION PROCESS CONTROL SYSTEMS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 9 No. 4 (2019)
- Tomasz Rymarczyk, Krzysztof Polakowski, Jan Sikora, A NEW CONCEPT OF DISCRETIZATION MODEL FOR IMAGING IMPROVING IN ULTRASOUND TRANSMISSION TOMOGRAPHY , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 9 No. 4 (2019)
- Konrad Niderla, Tomasz Rymarczyk, Jan Sikora, MANUFACTURING PLANNING AND CONTROL SYSTEM USING TOMOGRAPHIC SENSORS , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 8 No. 3 (2018)
- Tomasz Rymarczyk, Jan Sikora, SINGULAR INTEGRATION IN BOUNDARY ELEMENT METHOD FOR HELMHOLTZ EQUATION FORMULATED IN FREQUENCY DOMAIN , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 11 No. 4 (2021)
- Tomasz Rymarczyk, Jan Sikora, SOME MORE ON LOGARITHMIC SINGULARITY INTEGRATION IN BOUNDARY ELEMENT METOD , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 14 No. 1 (2024)
- Grzegorz Kłosowski, Tomasz Rymarczyk, APPLICATION OF CONVOLUTIONAL NEURAL NETWORKS IN WALL MOISTURE IDENTIFICATION BY EIT METHOD , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 12 No. 1 (2022)
- Tomasz Rymarczyk, Grzegorz Kłosowski, SUPPLY CHAIN RISK MANAGEMENT BY MONTE CARLO METHOD , Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska: Vol. 7 No. 4 (2017)