COMPUTER SUPPORT OF ERGONOMIC ANALYSIS OF WORKING CONDITIONS AT WORKSTATIONS
Damian KOLNY
dkolny@ath.bielsko.pl University of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Willowa 2, 43-309 Bielsko-Biała (Poland)
Dawid KURCZYK
University of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Willowa 2, 43-309 Bielsko-Biała (Poland)
Józef MATUSZEK
University of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Willowa 2, 43-309 Bielsko-Biała (Poland)
Abstract
The article shows issues of using computer-aided technologies for ergonomic analysis at worksplaces using a dedicated tool in the Delmia environment. The scope of the ergonomic evaluation has been limited to the analysis of RULA and NIOSH, the data needed for it was gathered on the basis of observation, interview and task analysis. The results of the research showed the strenous nature of the work, therefore improvements within undertaken workplace area were proposed and re-analyzed. The obtained results proved reduction of strenousness, which was the basis for the practical implementation of the proposed changes.
Keywords:
work ergonomics, modeling and simulationReferences
Genaidy, A. M., Al.-Shed, A. A., & Karwowski W. (1994). Postural stress analysis in industry. Applied Ergonomics, 25(2), 77–87.
DOI: https://doi.org/10.1016/0003-6870(94)90068-X
Google Scholar
Klembalska, K. (2006). Modelowanie bezpieczeństwa maszyny na etapie koncepcji jako narzędzie kształtowania ergonomii i bezpieczeństwa pracy. Journal of Research and Applications in Agricultural Engineering, 51(4), 21–29.
Google Scholar
Lasota, A. M., & Hankiewicz, K. (2015). Ergonomiczna ocena pozycji przy pracy w procesie cięcia i pakowania materiałów termoizolacyjnych. Logistyka, 5, 1059–1065.
Google Scholar
Marconi, M., Germani, M., Favi, C., & Raffaeli, R. (2018). CAD feature recognition as a means to prevent ergonomics issues during manual assembly tasks. Computer-Aided Design and Applications. https://doi.org/10.1080/16864360.2018.1441240
DOI: https://doi.org/10.14733/cadconfP.2017.400-404
Google Scholar
McAtamney, L., & Corlett, E. N. (1993). RULA: a survey method for the investigation of workrelated upper limb disorders. Applied Ergonomics, 24(2), 91–99.
DOI: https://doi.org/10.1016/0003-6870(93)90080-S
Google Scholar
Muszyński, Z. (2016). Rozwój ergonomii w Polsce i na świecie. Zeszyty Naukowe Małopolskiej Wyższej Szkoły Ekonomicznej w Tarnowie, 29(1), 87–100.
Google Scholar
Nowacka, W. Ł. (2010). Ergonomia i ergonomiczne projektowanie stanowisk pracy. Materiały dydaktyczne dla słuchaczy Studiów Podyplomowych „Bezpieczeństwo i ochrona człowieka w środowisku pracy i ergonomia”. Warszawa: Wydawnictwo Politechniki Warszawskiej.
Google Scholar
Slamková, E., Dulina, L., & Tabaková, M. (2010). Ergonómiwa v priemysle. Žilina: GEORG knihárstvo, tlačiareň.
Google Scholar
Zielińska, A., & Kurczyk, D. (2011). Wybrane narzędzie ergonomiczne w środowisku Delmia, Modele inżynierii teleinformatyki (Wybrane zastosowania) 6 (pp. 95–106). Koszalin: Wydawnictwo Uczelniane Politechniki Koszalińskiej.
Google Scholar
Authors
Damian KOLNYdkolny@ath.bielsko.pl
University of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Willowa 2, 43-309 Bielsko-Biała Poland
Authors
Dawid KURCZYKUniversity of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Willowa 2, 43-309 Bielsko-Biała Poland
Authors
Józef MATUSZEKUniversity of Bielsko-Biala, Faculty of Mechanical Engineering and Computer Science, Willowa 2, 43-309 Bielsko-Biała Poland
Statistics
Abstract views: 168PDF downloads: 31
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Most read articles by the same author(s)
- Damian KOLNY, Dorota WIĘCEK, Paweł ZIOBRO, Martin KRAJČOVIČ, APPLICATION OF A COMPUTER TOOL MONITORING SYSTEM IN CNC MACHINING CENTRES , Applied Computer Science: Vol. 13 No. 4 (2017)
- Józef MATUSZEK, Tomasz SENETA, Aleksander MOCZAŁA, FUZZY ASSESSMENT OF MANUFACTURABILITY DESIGN FOR MACHINING , Applied Computer Science: Vol. 15 No. 3 (2019)
Similar Articles
- Sebastian BIAŁASZ, INJECTION SIMULATION FOR THE MOLD PROCESS IN THE MEDICAL INDUSTRY , Applied Computer Science: Vol. 14 No. 3 (2018)
- Tomasz CHMIELEWSKI, Katarzyna ZIELIŃSKA, SURVEY OF REMOTELY CONTROLLED LABORATORIES FOR RESEARCH AND EDUCATION , Applied Computer Science: Vol. 13 No. 1 (2017)
- Rafał KLIZA, Karol ŚCISŁOWSKI, Ksenia SIADKOWSKA, Jacek PADYJASEK, Mirosław WENDEKER, STRENGTH ANALYSIS OF A PROTOTYPE COMPOSITE HELICOPTER ROTOR BLADE SPAR , Applied Computer Science: Vol. 18 No. 1 (2022)
- Michał BIAŁY, Marcin SZLACHETKA, CRANK-PISTON MODEL OF INTERNAL COMBUSTION ENGINE USING CAD/CAM/CAE IN THE MSC ADAMS , Applied Computer Science: Vol. 13 No. 1 (2017)
- Konrad KANIA, Mariusz MAZUREK, Tomasz RYMARCZYK, APPLICATION OF FINITE DIFFERENCE METHOD FOR MEASUREMENT SIMULATION IN ULTRASOUND TRANSMISSION TOMOGRAPHY , Applied Computer Science: Vol. 18 No. 2 (2022)
- Ali Fattah DAKHIL, Weffa Muhammed ALI, Ali Atshan Abdul REDA, PRIORITIZING SOFTWARE CAPABILITIES AND FOCAL POINTS OF MS ACCESS AND EXCEL IN PERSPECTIVE OF DATA MANAGEMENT , Applied Computer Science: Vol. 14 No. 3 (2018)
- Sebastian BIAŁASZ, Ramon PAMIES, NUMERICAL SIMULATION OF THE DESIGN OF EXTRUSION PROCESS OF POLYMERIC MINI-TUBES , Applied Computer Science: Vol. 14 No. 3 (2018)
- Jerzy JÓZWIK, Magdalena ZAWADA-MICHAŁOWSKA, Monika KULISZ, Paweł TOMIŁO, Marcin BARSZCZ, Paweł PIEŚKO, Michał LELEŃ, Kamil CYBUL, MODELING THE OPTIMAL MEASUREMENT TIME WITH A PROBE ON THE MACHINE TOOL USING MACHINE LEARNING METHODS , Applied Computer Science: Vol. 20 No. 2 (2024)
- Kuppan Chetty RAMANATHAN, Manju MOHAN, Joshuva AROCKIA DHANRAJ, BACKWARD MOTION PLANNING AND CONTROL OF MULTIPLE MOBILE ROBOTS MOVING IN TIGHTLY COUPLED FORMATIONS , Applied Computer Science: Vol. 17 No. 3 (2021)
- Marian JANCZAREK, Oleksij BULYANDRA, COMPUTER AIDED THERMAL PROCESSES IN TECHNICAL SPACES , Applied Computer Science: Vol. 13 No. 2 (2017)
You may also start an advanced similarity search for this article.
