FINITE ELEMENT BASED PREDICTION OF DEFORMATION IN SHEET METAL FORMING PROCESS
Damian KRASKA
kraska94@gmail.comRzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, al. Powst. Warszawy 8, 35-959 Rzeszów (Poland)
Tomasz TRZEPIECIŃSKI
* Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, al. Powst. Warszawy 8, 35-959 Rzeszów (Poland)
Abstract
In this paper the sheet forming process of cylindrical drawpieces was sim-ulated based on the finite element method by the explicit approach in the presence of contact conditions with isotropic and anisotropic friction. The experimental and numerical results obtained in the Abaqus finite element (FE) based program are presented. The aim of the experimental study is to analyse material behaviour under deformation and in addition to use the results to verify numerical simulation results. It was found that, although, the anisotropy of resistance to friction affects the height of ears, the influence of the friction formulation is relatively small in comparison with material anisotropy. The study indicates that FE analysis with 3-node triangular shell element S3R elements ensures the best approximation of the numerical results to the real process when both material and friction anisotropy are taken into account.
Keywords:
deep-drawing, finite element method, sheet metal formingReferences
Affronti, E., & Merklein, M. (2018). Analysis of the bending effects and the biaxial pre-straining in sheet metal stretch forming processes for the determination of the forming limits. International Journal of Mechanical Sciences, 138–139, 295–309. https://doi.org/10.1016/j.ijmecsci.2018.02.024
DOI: https://doi.org/10.1016/j.ijmecsci.2018.02.024
Google Scholar
Banabic, D. (2010). Sheet metal forming processes. Constitutive modelling and numerical simulation. Berlin Heidelberg: Springer-Verlag.
DOI: https://doi.org/10.1007/978-3-540-88113-1
Google Scholar
Falsafi, J., Demirci, E., & Silberschmidt, V. V. (2016). Computational assessment of residual formability in sheet metal forming processes for sustainable recycling. International Journal of Mechanical Sciences, 119, 187–196. https://doi.org/10.1016/j.ijmecsci.2016.10.013
DOI: https://doi.org/10.1016/j.ijmecsci.2016.10.013
Google Scholar
Hattalli, V. L., & Srivatsa, S. R. (2018). Sheet metal forming processes – recent technological advances. Materials Today – Proceedings, 5(1), 2564–2574. https://doi.org/10.1016/j.matpr.2017.11. 040
DOI: https://doi.org/10.1016/j.matpr.2017.11.040
Google Scholar
Hill, R. (1948). A theory of the yielding and plastic flow of anisotropic metals. Proceedings of the Royal Society A, 193, 281–297. https://doi.org/10.1098/rspa.1948.0045
DOI: https://doi.org/10.1098/rspa.1948.0045
Google Scholar
Larsson, M. (2009). Computational characterization of drawbeads: A basic modelling method for data generation. Journal of Materials Processing Technology, 209(1), 376–386. https://doi.org/10.1016/j.jmatprotec.2008.02.009
DOI: https://doi.org/10.1016/j.jmatprotec.2008.02.009
Google Scholar
Li, P., He, J., Liu, Q., Yang, M., Wang, Q., Yuan, Q., & Li, Y. (2017). Evaluation of forming forces in ultrasonic incremental sheet metal forming. Aerospace Science and Technology, 63, 132–139. https://doi.org/10.1016/j.ast.2016.12.028
DOI: https://doi.org/10.1016/j.ast.2016.12.028
Google Scholar
Ramzi, B. H., Sebastien, T., Fabrice, R., Gemala, H., & Pierrick, M. (2017). Numerical prediction of the forming limit diagrams of thin sheet metal using SPIF tests. Procedia Engineering, 183, 113–118. https://doi.org/10.1016/j.proeng.2017.04.029
DOI: https://doi.org/10.1016/j.proeng.2017.04.029
Google Scholar
Trzepieciński, T., & Gelgele, H. L. (2011). Investigation of anisotropy problems in sheet metal forming using finite element method. International Journal of Material Forming, 4(4), 357–369. https://doi.org/10.1007/s12289-010-0994-7
DOI: https://doi.org/10.1007/s12289-010-0994-7
Google Scholar
von Mises, R. (1913). Mechanik der festen Kö¨rper im plastisch deformablen Zustand. Nachrichten von der Köngl. Gesellschaft der Wissenschaften zu Göttingen, Mathematisch-Physikalische Klasse 1913, 582–592.
Google Scholar
Authors
Damian KRASKAkraska94@gmail.com
Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, al. Powst. Warszawy 8, 35-959 Rzeszów Poland
Authors
Tomasz TRZEPIECIŃSKI* Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, al. Powst. Warszawy 8, 35-959 Rzeszów Poland
Statistics
Abstract views: 595PDF downloads: 15
License

This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Similar Articles
- Rafał KLIZA, Karol ŚCISŁOWSKI, Ksenia SIADKOWSKA, Jacek PADYJASEK, Mirosław WENDEKER, STRENGTH ANALYSIS OF A PROTOTYPE COMPOSITE HELICOPTER ROTOR BLADE SPAR , Applied Computer Science: Vol. 18 No. 1 (2022)
- Stanisław BŁAWUCKI, Kazimierz ZALESKI, CONSTRUCTION AND TECHNOLOGICAL ANALYSIS OF THE BROACH BLADE SHAPE USING THE FINITE ELEMENT METHOD , Applied Computer Science: Vol. 13 No. 1 (2017)
- Quirino ESTRADA, Dariusz SZWEDOWICZ, Julio C. VERGARA, José SOLIS, Miguel A. PAREDES, Lara WIEBE, Jesús M. SILVA, NUMERICAL SIMULATIONS OF SANDWICH STRUCTURES UNDER LATERAL COMPRESSION , Applied Computer Science: Vol. 15 No. 2 (2019)
- Puppala Praneeth, Majety Sathvika, Vivek Kommareddy, Madala Sarath, Saran Mallela, Koneru Suvarna Vani, Prasun Chkrabarti, CLASSIFICATION OF PARKINSON'S DISEASE IN BRAIN MRI IMAGES USING DEEP RESIDUAL CONVOLUTIONAL NEURAL NETWORK , Applied Computer Science: Vol. 19 No. 2 (2023)
- Konrad KANIA, Mariusz MAZUREK, Tomasz RYMARCZYK, APPLICATION OF FINITE DIFFERENCE METHOD FOR MEASUREMENT SIMULATION IN ULTRASOUND TRANSMISSION TOMOGRAPHY , Applied Computer Science: Vol. 18 No. 2 (2022)
- Mohamed ELBAHRI, Nasreddine TALEB, Sid Ahmed El Mehdi ARDJOUN, Chakib Mustapha Anouar ZOUAOUI , FEW-SHOT LEARNING WITH PRE-TRAINED LAYERS INTEGRATION APPLIED TO HAND GESTURE RECOGNITION FOR DISABLED PEOPLE , Applied Computer Science: Vol. 20 No. 2 (2024)
- Puja SARAF, Jayantrao PATIL, Rajnikant WAGH, ENHANCING TOMATO LEAF DISEASE DETECTION THROUGH MULTIMODAL FEATURE FUSION , Applied Computer Science: Vol. 20 No. 4 (2024)
- Saheed ADEWUYI, Segun AINA, Aderonke LAWAL, Adeniran OLUWARANTI, Moses UZUNUIGBE, AN OVERVIEW OF DEEP LEARNING TECHNIQUES FOR SHORT-TERM ELECTRICITY LOAD FORECASTING , Applied Computer Science: Vol. 15 No. 4 (2019)
- Krzysztof Michalczyk, Mariusz Warzecha, Robert Baran, A NEW METHOD FOR GENERATING VIRTUAL MODELS OF NONLINEAR HELICAL SPRINGS BASED ON A RIGOROUS MATHEMATICAL MODEL , Applied Computer Science: Vol. 19 No. 2 (2023)
- Mantas Vaitonis, Konstantinas Korovkinas, THE POTENTIAL FOR REAL-TIME TESTING OF HIGH FREQUENCY TRADING STRATEGIES THROUGH A DEVELOPED TOOL DURING VOLATILE MARKET CONDITIONS , Applied Computer Science: Vol. 19 No. 2 (2023)
<< < 1 2 3 4 5 6 7 8 9 10 > >>
You may also start an advanced similarity search for this article.