MEDICAL IMAGING AND 3D RECONSTRUCTION FOR OBTAINING THE GEOMETRICAL AND PHYSICAL MODEL OF A CONGENITAL BILATERAL RADIO-ULNAR SYNOSTOSIS
Robert KARPIŃSKI
r.karpinski@pollub.pl* Department of Machine Design and Mechatronics, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin (Poland)
Józef JONAK
Department of Machine Design and Mechatronics, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin (Poland)
Jacek MAKSYMIUK
* Orthopedic Department, Łęczna Hospital, Krasnystawska 52, 21-010 Łęczna (Poland)
Abstract
The paper presents results of a 3D reconstruction of a congenital bilateral radio-ulnar synostosis. Basics of anatomy and biomechanical analysis of the elbow joint were introduced. Case report of a congenital bilateral radio-ulnar synostosis was presented. Based on the data from computed tomography imaging, the model of a congenital bilateral radio-ulnar synostosis was constructed. Basic information on reverse engineering, rapid prototyping and methods of making physical models are presented. The creation of physical models was aimed at pre-operative planning and conceptualization. Physical models were also used in the educational form at the stage of communication with the patient.
Keywords:
computed tomography, rapid prototyping, reverse engineeringReferences
Al-Saadi, Z. S., & Havekrog, B. H. (2008). Congenital radioulnar synostosis. Ugeskr Laeger, 170(40), 3147–3148.
Bagaria, V., Deshpande, S., Rasalkar, D. D., Kuthe, A., & Paunipagar, B. K. (2011). Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures. European journal of radiology, 80(3), 814–820.
Brown, G. A., Firoozbakhsh, K., DeCoster, T. A., Reyna Jr, J. R., & Moneim, M. (2003). Rapid prototyping: the future of trauma surgery? The Journal of Bone and Joint Surgery, 85, 49–55.
Budzik, G., Dziubek, T., & Turek, P. (2015). Podstawowe czynniki wpływające na jakość obrazów tomograficznych. Problemy Nauk Stosowanych, 3, 077–084.
Fahlstrom, S. (1932). Radio-ulnar synostosis: historical review and case report. The Journal of Bone and Joint Surgery, 14(2), 395–403.
Frame, M., & Huntley, J. S. (2012). Rapid prototyping in orthopaedic surgery: a user's guide. The Scientific World Journal, 2012, 838575. doi:10.1100/2012/838575
Guarino, J., Tennyson, S., McCain, G., Bond, L., Shea, K., & King, H. (2007). Rapid prototyping technology for surgeries of the pediatric spine and pelvis: benefits analysis. Journal of Pediatric Orthopaedics, 27(8), 955–960.
Hansen, O. H., & Andersen, N. O. (1970). Congenital radio-ulnar synostosis. Report of 37 cases. Acta Orthopaedica Scandinavica, 41(3), 225–230.
Holubar, S. D., Hassinger, J. P., & Dozois, E. J. (2009). Virtual pelvic anatomy and surgery simulator: an innovative tool for teaching pelvic surgical anatomy. Studies in Health Technology and Informatics, 142, 122–124.
Hurson, C., Tansey, A., O’Donnchadha, B., Nicholson, P., Rice, J., & McElwain, J. (2007). Rapid prototyping in the assessment, classification and preoperative planning of acetabular fractures. Injury, 38(10), 1158–1162.
Karpiński, R., Jaworski, Ł., & Zubrzycki, J. (2016). Structural analysis of articular cartilage of the hip joint using finite element method. Advances in Science and Technology Research Journal, 10(31), 240–246. https://doi.org/10.12913/22998624/64064
Karpiński, R., Jaworski, Ł., & Zubrzycki, J. (2017). The design and structural analysis of the endoprosthesis of the shoulder joint. ITM Web of Conferences, 15, 07015. https://doi.org/10.1051/itmconf/20171507015
Karpiński, R., Jaworski, Ł., Szala, M., & Mańko, M. (2017). Influence of patient position and implant material on the stress distribution in an artificial intervertebral disc of the lumbar vertebrae. ITM Web of Conferences, 15, 07006. https://doi.org/10.1051/itmconf/20171507006
Kozłowska, E., & Zubrzycki, J. (2017). Using methods of the reverse engineering to carry personalised preoperative stabilisers out on the example of vertebrae of human spine. ITM Web of Conferences, 15, 02007. https://doi.org/10.1051/itmconf/20171502007
McGurk, M., Potamianos, P., Amis, A. A., & Goodger, N. M. (1997). Rapid prototyping techniques for anatomical modelling in medicine. Annals of the Royal College of Surgeons of England, 79(3), 169–174.
Mulford, J. S., Babazadeh, S., & Mackay, N. (2016). Three dimensional printing in orthopaedic surgery: review of current and future applications. ANZ Journal of Surgery, 86(9), 648–653.
Petzold, R., Zeilhofer, H. F., & Kalender, W. A. (1999). Rapid prototyping technology in medicine – basics and applications. Computerized Medical Imaging and Graphics, 23(5), 277–284.
Ratajczyk, E. (2012). Rentgenowska tomografia komputerowa (CT) do zadań przemysłowych. Pomiary Automatyka Robotyka, 16, 104–113.
Rizzo, R., Pavone, V., Corsello, G., Sorge, G., & Opitz, J. M. (1997). Autosomal dominant and sporadic radio-ulnar synostosis. American Journal of Medical Genetics, 68(2), 127–134.
Skalski, K., Grygoruk, R., Makuch, A., & Dąbrowska-Tkaczyk, A. (2015). Modelowanie wirtualne i materialne na potrzeby komputerowego wspomagania zabiegów operacyjnych. In M. Gzik, M.
Pawlikowski, M. Lewandowska-Szumieł & M. Wychowański (Eds.), Biomechanika i Inżynieria Biomedyczna (pp. 481–498). Akademicka Oficyna Wydawnicza EXIT.
Skalski, K., & Haraburda, M. (2009). Komputerowe wspomagane projektowanie i wytwarzanie implantów stawów człowieka. Monografia nr 137. Radom: Wydawnictwo Politechniki Radomskiej.
Zubrzycki, J., & Braniewska, M. (2017). Zastosowanie inżynierii odwrotnej w projektowaniu spersonalizowanego implantu stawu biodrowego. Mechanik, 90(1), 46–47.
Zubrzycki, J., Karpiński, R., & Górniak, B. (2016). Computer aided design and structural analysis of the endoprosthesis of the knee joint. Applied Computer Science, 12(2), 84–95.
Bagaria, V., Deshpande, S., Rasalkar, D. D., Kuthe, A., & Paunipagar, B. K. (2011). Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures. European journal of radiology, 80(3), 814–820.
Brown, G. A., Firoozbakhsh, K., DeCoster, T. A., Reyna Jr, J. R., & Moneim, M. (2003). Rapid prototyping: the future of trauma surgery? The Journal of Bone and Joint Surgery, 85, 49–55.
Budzik, G., Dziubek, T., & Turek, P. (2015). Podstawowe czynniki wpływające na jakość obrazów tomograficznych. Problemy Nauk Stosowanych, 3, 077–084.
Fahlstrom, S. (1932). Radio-ulnar synostosis: historical review and case report. The Journal of Bone and Joint Surgery, 14(2), 395–403.
Frame, M., & Huntley, J. S. (2012). Rapid prototyping in orthopaedic surgery: a user's guide. The Scientific World Journal, 2012, 838575. doi:10.1100/2012/838575
Guarino, J., Tennyson, S., McCain, G., Bond, L., Shea, K., & King, H. (2007). Rapid prototyping technology for surgeries of the pediatric spine and pelvis: benefits analysis. Journal of Pediatric Orthopaedics, 27(8), 955–960.
Hansen, O. H., & Andersen, N. O. (1970). Congenital radio-ulnar synostosis. Report of 37 cases. Acta Orthopaedica Scandinavica, 41(3), 225–230.
Holubar, S. D., Hassinger, J. P., & Dozois, E. J. (2009). Virtual pelvic anatomy and surgery simulator: an innovative tool for teaching pelvic surgical anatomy. Studies in Health Technology and Informatics, 142, 122–124.
Hurson, C., Tansey, A., O’Donnchadha, B., Nicholson, P., Rice, J., & McElwain, J. (2007). Rapid prototyping in the assessment, classification and preoperative planning of acetabular fractures. Injury, 38(10), 1158–1162.
Karpiński, R., Jaworski, Ł., & Zubrzycki, J. (2016). Structural analysis of articular cartilage of the hip joint using finite element method. Advances in Science and Technology Research Journal, 10(31), 240–246. https://doi.org/10.12913/22998624/64064
Karpiński, R., Jaworski, Ł., & Zubrzycki, J. (2017). The design and structural analysis of the endoprosthesis of the shoulder joint. ITM Web of Conferences, 15, 07015. https://doi.org/10.1051/itmconf/20171507015
Karpiński, R., Jaworski, Ł., Szala, M., & Mańko, M. (2017). Influence of patient position and implant material on the stress distribution in an artificial intervertebral disc of the lumbar vertebrae. ITM Web of Conferences, 15, 07006. https://doi.org/10.1051/itmconf/20171507006
Kozłowska, E., & Zubrzycki, J. (2017). Using methods of the reverse engineering to carry personalised preoperative stabilisers out on the example of vertebrae of human spine. ITM Web of Conferences, 15, 02007. https://doi.org/10.1051/itmconf/20171502007
McGurk, M., Potamianos, P., Amis, A. A., & Goodger, N. M. (1997). Rapid prototyping techniques for anatomical modelling in medicine. Annals of the Royal College of Surgeons of England, 79(3), 169–174.
Mulford, J. S., Babazadeh, S., & Mackay, N. (2016). Three dimensional printing in orthopaedic surgery: review of current and future applications. ANZ Journal of Surgery, 86(9), 648–653.
Petzold, R., Zeilhofer, H. F., & Kalender, W. A. (1999). Rapid prototyping technology in medicine – basics and applications. Computerized Medical Imaging and Graphics, 23(5), 277–284.
Ratajczyk, E. (2012). Rentgenowska tomografia komputerowa (CT) do zadań przemysłowych. Pomiary Automatyka Robotyka, 16, 104–113.
Rizzo, R., Pavone, V., Corsello, G., Sorge, G., & Opitz, J. M. (1997). Autosomal dominant and sporadic radio-ulnar synostosis. American Journal of Medical Genetics, 68(2), 127–134.
Skalski, K., Grygoruk, R., Makuch, A., & Dąbrowska-Tkaczyk, A. (2015). Modelowanie wirtualne i materialne na potrzeby komputerowego wspomagania zabiegów operacyjnych. In M. Gzik, M.
Pawlikowski, M. Lewandowska-Szumieł & M. Wychowański (Eds.), Biomechanika i Inżynieria Biomedyczna (pp. 481–498). Akademicka Oficyna Wydawnicza EXIT.
Skalski, K., & Haraburda, M. (2009). Komputerowe wspomagane projektowanie i wytwarzanie implantów stawów człowieka. Monografia nr 137. Radom: Wydawnictwo Politechniki Radomskiej.
Zubrzycki, J., & Braniewska, M. (2017). Zastosowanie inżynierii odwrotnej w projektowaniu spersonalizowanego implantu stawu biodrowego. Mechanik, 90(1), 46–47.
Zubrzycki, J., Karpiński, R., & Górniak, B. (2016). Computer aided design and structural analysis of the endoprosthesis of the knee joint. Applied Computer Science, 12(2), 84–95.
KARPIŃSKI, R. ., JONAK, J., & MAKSYMIUK, J. (2018). MEDICAL IMAGING AND 3D RECONSTRUCTION FOR OBTAINING THE GEOMETRICAL AND PHYSICAL MODEL OF A CONGENITAL BILATERAL RADIO-ULNAR SYNOSTOSIS. Applied Computer Science, 14(1), 84–93. https://doi.org/10.23743/acs-2018-08
Authors
Robert KARPIŃSKIr.karpinski@pollub.pl
* Department of Machine Design and Mechatronics, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin Poland
Authors
Józef JONAKDepartment of Machine Design and Mechatronics, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin Poland
Authors
Jacek MAKSYMIUK* Orthopedic Department, Łęczna Hospital, Krasnystawska 52, 21-010 Łęczna Poland
Statistics
Abstract views: 182PDF downloads: 18
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in Applied Computer Science are open-access and distributed under the terms of the Creative Commons Attribution 4.0 International License.
Most read articles by the same author(s)
- Robert KARPIŃSKI, KNEE JOINT OSTEOARTHRITIS DIAGNOSIS BASED ON SELECTED ACOUSTIC SIGNAL DISCRIMINANTS USING MACHINE LEARNING , Applied Computer Science: Vol. 18 No. 2 (2022)
- Robert KARPIŃSKI, Przemysław KRAKOWSKI, Józef JONAK, Anna MACHROWSKA, Marcin MACIEJEWSKI, COMPARISON OF SELECTED CLASSIFICATION METHODS BASED ON MACHINE LEARNING AS A DIAGNOSTIC TOOL FOR KNEE JOINT CARTILAGE DAMAGE BASED ON GENERATED VIBROACOUSTIC PROCESSES , Applied Computer Science: Vol. 19 No. 4 (2023)
- Marcin MACIEJEWSKI, Barbara MACIEJEWSKA, Robert KARPIŃSKI, Przemysław KRAKOWSKI, ELECTROCARDIOGRAM GENERATION SOFTWARE FOR TESTING OF PARAMETER EXTRACTION ALGORITHMS , Applied Computer Science: Vol. 16 No. 4 (2020)
- Anna MACHROWSKA, Robert KARPIŃSKI, Józef JONAK, Jakub SZABELSKI, NUMERICAL PREDICTION OF THE COMPONENT-RATIO-DEPENDENT COMPRESSIVE STRENGTH OF BONE CEMENT , Applied Computer Science: Vol. 16 No. 3 (2020)
- Anna MACHROWSKA, Robert KARPIŃSKI, Marcin MACIEJEWSKI, Józef JONAK, Przemysław KRAKOWSKI, APPLICATION OF EEMD-DFA ALGORITHMS AND ANN CLASSIFICATION FOR DETECTION OF KNEE OSTEOARTHRITIS USING VIBROARTHROGRAPHY , Applied Computer Science: Vol. 20 No. 2 (2024)
- Robert KARPIŃSKI, Anna MACHROWSKA, Marcin MACIEJEWSKI, APPLICATION OF ACOUSTIC SIGNAL PROCESSING METHODS IN DETECTING DIFFERENCES BETWEEN OPEN AND CLOSED KINEMATIC CHAIN MOVEMENT FOR THE KNEE JOINT , Applied Computer Science: Vol. 15 No. 1 (2019)
- Przemysław KRAKOWSKI, Józef JONAK, Robert KARPIŃSKI, Łukasz JAWORSKI, USEFULNESS OF RAPID PROTOTYPING IN PLANNING COMPLEX TRAUMA SURGERIES , Applied Computer Science: Vol. 15 No. 3 (2019)
- Anna MACHROWSKA, Robert KARPIŃSKI, Przemysław KRAKOWSKI, Józef JONAK, DIAGNOSTIC FACTORS FOR OPENED AND CLOSED KINEMATIC CHAIN OF VIBROARTHROGRAPHY SIGNALS , Applied Computer Science: Vol. 15 No. 3 (2019)
- Robert KARPIŃSKI, Jakub GAJEWSKI, Jakub SZABELSKI, Dalibor BARTA, APPLICATION OF NEURAL NETWORKS IN PREDICTION OF TENSILE STRENGTH OF ABSORBABLE SUTURES , Applied Computer Science: Vol. 13 No. 4 (2017)
- Przemysław KRAKOWSKI, Robert KARPIŃSKI, Marcin MACIEJEWSKI, APPLICATIONS OF MODERN IMAGING TECHNOLOGY IN ORTHOPAEDIC TRAUMA SURGERY , Applied Computer Science: Vol. 14 No. 3 (2018)
Similar Articles
- Maria TOMASIKOVA, Frantisek BRUMERČÍK, Aleksander NIEOCZYM, DESIGN AND DYNAMICS MODELING FOR ELECTRIC VEHICLE , Applied Computer Science: Vol. 13 No. 3 (2017)
- Amina ALYAMANI, Oleh YASNIY, CLASSIFICATION OF EEG SIGNAL BY METHODS OF MACHINE LEARNING , Applied Computer Science: Vol. 16 No. 4 (2020)
- Robert KARPIŃSKI, Anna MACHROWSKA, Marcin MACIEJEWSKI, APPLICATION OF ACOUSTIC SIGNAL PROCESSING METHODS IN DETECTING DIFFERENCES BETWEEN OPEN AND CLOSED KINEMATIC CHAIN MOVEMENT FOR THE KNEE JOINT , Applied Computer Science: Vol. 15 No. 1 (2019)
- Damian KOLNY, Dawid KURCZYK, Józef MATUSZEK, COMPUTER SUPPORT OF ERGONOMIC ANALYSIS OF WORKING CONDITIONS AT WORKSTATIONS , Applied Computer Science: Vol. 15 No. 1 (2019)
- Sylwester KORGA, Marcin BARSZCZ, Krzysztof DZIEDZIC, DEVELOPMENT OF SOFTWARE FOR IDENTIFICATION OF FILAMENTS USED IN 3D PRINTING TECHNOLOGY , Applied Computer Science: Vol. 15 No. 1 (2019)
- Sana KOUBAA, Jamel MARS, Fakhreddine DAMMAK, EFFICIENT NUMERICAL MODELLING OF FUNCTIONALLY GRADED SHELL MECHANICAL BEHAVIOR , Applied Computer Science: Vol. 15 No. 1 (2019)
- Damian KOLNY, Dorota WIĘCEK, Paweł ZIOBRO, Martin KRAJČOVIČ, APPLICATION OF A COMPUTER TOOL MONITORING SYSTEM IN CNC MACHINING CENTRES , Applied Computer Science: Vol. 13 No. 4 (2017)
- Waldemar SUSZYŃSKI, Małgorzata CHARYTANOWICZ, Wojciech ROSA, Leopold KOCZAN, Rafał STĘGIERSKI, DETECTION OF FILLERS IN THE SPEECH BY PEOPLE WHO STUTTER , Applied Computer Science: Vol. 17 No. 4 (2021)
- Anna MACHROWSKA, Robert KARPIŃSKI, Przemysław KRAKOWSKI, Józef JONAK, DIAGNOSTIC FACTORS FOR OPENED AND CLOSED KINEMATIC CHAIN OF VIBROARTHROGRAPHY SIGNALS , Applied Computer Science: Vol. 15 No. 3 (2019)
- Józef MATUSZEK, Tomasz SENETA, Aleksander MOCZAŁA, FUZZY ASSESSMENT OF MANUFACTURABILITY DESIGN FOR MACHINING , Applied Computer Science: Vol. 15 No. 3 (2019)
<< < 1 2 3 4 5 6 7 8 9 10 > >>
You may also start an advanced similarity search for this article.
