Statistical reliability of decisions on controlled process faults

Yevhen Volodarskyi; Oleh Kozyr; Zygmunt Warsza

doi:10.35784/iapgos.7398

Open full text

PDF

Published: Mar 31, 2025

DOI: https://doi.org/10.35784/iapgos.7398

Issue Vol. 15 No. 1 (2025)

Articles

Statistical reliability of decisions on controlled process faults
Yevhen Volodarskyi, Oleh Kozyr, Zygmunt Warsza

5-9
Pulse chaotic generator based a classical Chua’s circuit
Volodymyr Rusyn, Andrii Samila, Bogdan Markovych, Aceng Sambas, Christos Skiadas, Milan Guzan

10-14
Stability of metaheuristic PID controllers in photovoltaic dc microgrids
Elvin Yusubov, Lala Bekirova

15-21
Integrating numerical simulation and experimental data for enhanced structural health monitoring of bridges
Om Narayan Singh, Kaushik Dey

22-26
Application of multi-agent programming for modeling the viscosity state of mash in alcohol production
Larysa Gumeniuk, Ludmyla Markina, Viktor Satsyk, Pavlo Humeniuk, Anton Lashch

27-32
A stochastic interval algebra for smart factory processes
Piotr Dziurzanski, Konrad Kabala, Agnieszka Konrad

33-38
Advancements in solar panel maintenance: a review of IoT-integrated automatic dust cleaning systems
Balamurugan Rangaswamy, Ramasamy Nithya

39-44
Modified cosine-quadratic reflectance model
Oleksandr Romanyuk, Volodymyr Lytvynenko, Yevhen Zavalniuk

45-48
Comparative analysis of lithium-iron-phosphate and sodium-ion energy storage devices
Huthaifa A. Al_Issa, Mohamed Qawaqzeh, Lina Hani Hussienat, Ruslan Oksenych, Oleksandr Miroshnyk, Oleksandr Moroz, Iryna Trunova, Volodymyr Paziy, Serhii Halko, Taras Shchur

49-54
Investigation of DC-AC converter with microcontroller control of inverter frequency
Anatolii Tkachuk, Mykola Polishchuk, Liliia Polishchuk, Serhii Kostiuchko, Serhii Hryniuk, Liudmyla Konkevych

55-61
Mathematical apparatus for finding the optimal configuration secure communication network with a specified number of subscribers
Volodymyr Khoroshko, Yuliia Khokhlachova, Oleksandr Laptiev, Al-Dalvash Ablullah Fowad

62-66
Critical cybersecurity aspects for improving enterprise digital infrastructure protection
Roman Kvуetnyy, Volodymyr Kotsiubynskyi, Serhii Husak, Yaroslav Movchan, Nataliia Dobrovolska, Sholpan Zhumagulova, Assel Aitkazina

67-72
Modification of the Peterson algebraic decoder
Dmytro Mogylevych, Iryna Kononova, Liudmyla Pogrebniak, Kostiantyn Lytvyn, Igor Gyrenko

73-78
Development of a model for calculating the dilution of precision coefficients of the global navigation system at a given point in space
Oleksandr Turovsky, Nazarii Blazhennyi, Roman Vozniak, Yana Horbachova, Kostiantyn Horbachov, Nataliia Rudenko

79-87
LLM based expert AI agent for mission operation management
Sobhana Mummaneni, Syama Sameera Gudipati, Satwik Panda

88-94
Review of operating systems used in unmanned aerial vehicles
Viktor Ivashko, Oleh Krulikovskyi, Serhii Haliuk, Andrii Samila

95-100
Optimization of machine learning methods for de-anonymization in social networks
Nurzhigit Smailov, Fatima Uralova, Rashida Kadyrova, Raiymbek Magazov, Akezhan Sabibolda

101-104
Robust deepfake detection using Long Short-Term Memory networks for video authentication
Ravi Kishan Surapaneni, Hameed Syed, Harshitha Kakarala, Venkata Sai Srikar Yaragudipati

105-108
Regional trending topics mining from real time Twitter data for sentiment, context, network and temporal analysis
Mousumi Hasan, Mujiba Shaima, Quazi Saad ul Mosaher

109-116
Model development to improve the predictive maintenance reliability of medical devices
Khalid Musallam Alahmadi, Essam Rabea Ibrahim Mahmoud, Fitrian Imaduddin

117-124
Explainable artificial intelligence for detecting lung cancer
Vinod Kumar R S, Bushara A R, Abubeker K M, Smitha K M, Abini M A, Jubaira Mammoo, Bijesh Paul

125-130
Design and implementation of a vein detection system for improved accuracy in blood sampling
Omar Boutalaka, Achraf Benba, Sara Sandabad

131-134
Metrological feature for determining the concentration of cholesterol, triglycerides, and phospholipids for psoriasis detection
Ivan Diskovskyi, Yurii Kachurak, Orysya Syzon, Marta Kolishetska, Bogdan Pinaiev, Oksana Stoliarenko

135-138
Development of a mobile application for testing fine motor skills disorders
Marko Andrushchenko, Karina Selivanova, Oleg Avrunin, Alla Kraievska, Orken Mamyrbayev, Kymbat Momynzhanova

139-143
Artificial intelligence in education: ChatGPT-based simulations in teachers’ preparation
Marina Drushlyak, Tetiana Lukashova, Volodymyr Shamonia, Olena Semenikhina

144-152
CKSD: Comprehensive Kurdish-Sorani database
Jihad Anwar Qadir, Samer Kais Jameel, Wshyar Omar Khudhur, Kamaran H. Manguri

153-156

DOI

https://doi.org/10.35784/iapgos.7398

Authors

Yevhen Volodarskyi

vet-1@ukr.net

National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute", Department of Information and Measuring Technologies, Ukraine

Oleh Kozyr

olegkozyr86@gmail.com

National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute", Department of Information and Measuring Technologies, Ukraine

https://orcid.org/0000-0002-9285-5940

Zygmunt Warsza

zlw1936@gmail.com

Polish Metrological Society, Poland

Abstract

The article considers the issues of using control charts to detect the disruption of the technological process. The possible influence of measurement error on the correctness of decisions is considered. To ensure the statistical reliability of the decisions made, their plausibility, a priori probability is used. The effectiveness of assessing the compliance of the technological process with established standards is discussed, when the distributions of possible values of its parameters and errors of their measurements are uniform.

Keywords:

statistical reliability of decisions, erroneous decisions, quality control, conformity assessment, measurement errors, a-posteriori probability

References

[1] Aslam M., Saghir A., Ahmad L.: Introduction to Statistical Process Control. John Wiley & Sons, 2020. DOI: https://doi.org/10.1002/9781119528425

[2] Colosimo B. M., del Castillo E.: Bayesian Process Monitoring, Control and Optimization. CRC Press: United States 2007. DOI: https://doi.org/10.1201/9781420010701

[3] Horst R., Hans-Joachim M.: Statistisch Methoden der Qualitätssicherung. Carl Hansen Verlag, Munchen Wien 1995.

[4] Johnson A. A., Ott M. Q., Dogucu M.: Bayes Rules! An Introduction to Applied Bayesian Modeling. CRC Press, United States 2022. DOI: https://doi.org/10.1201/9780429288340

[5] Khan I. et al.: Monitoring of manufacturing process using Bayesian EWMA control chart under ranked based sampling designs. Sci Rep 13, 2023, 18240 [https://doi.org/10.1038/s41598-023-45553-x]. DOI: https://doi.org/10.1038/s41598-023-45553-x

[6] Leon-Garcia A.: Probability, Statistics, and Random Processes for Electrical Engineering, 3rd edition. Pearson/Prentice Hall, USA 2008.

[7] Mitra A.: Fundamentals of Quality Control and Improvement. John Wiley & Sons, 2016.

[8] Montgomery D. C.: Introduction to Statistical Quality Control. 8th Edition. John Wiley & Sons, 2019.

[9] Reza Maleki M., Amiri A., Castagliola P.: Measurement Errors in Statistical Process Monitoring: a Literature Review. Computers & Industrial Engineering 103, 2016, 316–329 [http://dx.doi.org/10.1016/j.cie.2016.10.026]. DOI: https://doi.org/10.1016/j.cie.2016.10.026

[10] Volodarsky E., Warsza Z. L., Kosheva L.: Structural and algorithmic methods increasing reliability of measurement inspection. 25th National Scientific Symposium with int. participation: Metrology and Metrology Assurance, Sozopol, Sofia, Bulgaria, 2015, 55–59.

[11] Volodarsky E., Warsza Z., Kosheva L., Idźkowski A.: Method of upgrading the reliability of measurement inspection. Jabłoński R., Brezina T. (Eds.): Advanced Mechatronics Solutions (Advances in Intelligent Systems and Computing 393). Springer 2016, 431–440. DOI: https://doi.org/10.1007/978-3-319-23923-1_63

[12] Volodarsky E., Warsza Z., Kosheva L., Idźkowski A.: Precautionary statistical criteria in the monitoring quality of technological process. Szewczyk R., Kaliczyńska M. (Eds.): Recent Advances in Systems, Control and Information Technology. Int. Conference SCIT 2016, Warsaw, Poland, Springer Int. Pub. AG, 2017, 740–750 [https://doi.org/10.1007/978-3-319-48923-0]. DOI: https://doi.org/10.1007/978-3-319-48923-0_80

[13] Volodarsky E., Warsza Z., Kosheva L., Idźkowski A.: Transforming the conversion characteristic of a measuring system used in technical control. Szewczyk R., Kaliczyńska M. (Eds.): Recent Advances in Systems, Control and Information Technology. Proceeding of Int. Conference SCIT 2016, Warsaw, Poland, Springer Int. Pub. AG, 2017, 524–534 [https://doi.org/10.1007/978-3-319-48923-0]. DOI: https://doi.org/10.1007/978-3-319-48923-0_56

[14] Volodarskyi Y., Kozyr O., Kosheva L.: Impact of Measurement Procedure on Technological Process Control. XXXIV International Scientific Symposium Metrology and Metrology Assurance (MMA), Sozopol, Bulgaria, 2024, 1–5 [http://doi.org/10.1109/MMA62616.2024.10817633]. DOI: https://doi.org/10.1109/MMA62616.2024.10817633

[15] Volodarskyi Y., Kozyr O., Warsza Z. L.: Principal Components Method in Control Charts Analysis. Lecture Notes in Networks and Systems 630. Springer, Cham., 2023, 212–222 [https://doi.org/10.1007/978-3-031-25844-2_20]. DOI: https://doi.org/10.1007/978-3-031-25844-2_20

[16] Control charts – Part 2: Shewhart control charts, ISO 7870-2, 2013.

Volodarskyi, Y., Kozyr, O., & Warsza, Z. (2025). Statistical reliability of decisions on controlled process faults. Informatyka, Automatyka, Pomiary W Gospodarce I Ochronie Środowiska, 15(1), 5–9. https://doi.org/10.35784/iapgos.7398

Statistical reliability of decisions on controlled process faults

Issue Vol. 15 No. 1 (2025)

Archives

DOI

Authors

Abstract

Keywords:

References

License

Article Sidebar

Issue Vol. 15 No. 1 (2025)

Archives

Main Article Content

DOI

Authors

Abstract

Keywords:

References

Article Details

License